Boss OC-2 Sabrotone problem

[Lost_soul]

I checked for shorts between 17e and f and there was no continuity.

If you say so...

I just checked them and that's not a solder bridge.
I will be testing the Circuit tomorrow with an audio probe but idk what is the path i should follow from the input to the output

[Mark Hammer]

Wait a second.  I'm confused.  Is this about a DC-2 or an OC-2?  Big difference.  The thread title says OC-2 but the initial images are clearly DC-2.  What are we talking about here?

[Lost_soul]

Wait a second.  I'm confused.  Is this about a DC-2 or an OC-2?  Big difference.  The thread title says OC-2 but the initial images are clearly DC-2.  What are we talking about here?

It's an OC-2
What images are you talking about?

[Mark Hammer]

Now I'm REALLY confused.  There was another thread, with a DC-2 title that was collapsed into this one, if I'm not mistaken.  When I saw the picture in the first post, admittedly only a quick glance, it seemed to have more chips than I would have expected for a drive circuit but something close to what a DC-2 would have (with quad op-amps replacing duals).  I'm beginning to think I misread BOTH threads on my smaller tablet screen as D when it was an O.  Damn aging eyes!

[idy]

Welcome, and I salute your bravery.
Have you read/watched videos on soldering skills? The right tools are important, the right temperature and solder.
Foundation skills avoid so many problems.
And this is a very hard circuit for strip board.