70's Big Muff

[jnever]

Hello, I am a new member here and was hoping to find a little help.  My Tone/Bypass switch on my Big Muff was broken(again)...and by broken I mean it was in about 10 pieces...and I am not sure how to rewire a new switch in.  If possible I would rather not even have a switch and just have it wired for the tone to always be active.  As it is now, it looks like there should have been 3 wires going from the board to the switch.  From right to left  I have green, green and I am guessing red.  The red wire is no longer attached to anything at the moment, so I don't know where it should be connected.  

Any help would be greatly appreciated!  The board has EH1322 if that helps.

James

[idlefaction]

maybe take some photos of the insides so those of us who don't happen to have one of those exact pedals can try and help?  

[jnever]

You should be able to see it here...let me know if it doesn't work.  

From left to right...Input, Tone/Bypass, Output.

One of the 3 posts below the input is where I think the missing red wire is supposed to go.  You can also see the 2 green wires that are not connected to anything...where the tone switch was.

Thanks again for any help.

James

http://www.imagestation.com/mypictures/inbox/view.html?id=4193770205&url=http%3A%2F%2Fwww.imagestation.com%2Fpicture%2Fsraid99%2Fp81f77d6a4a32e6effd228a64dc0b9113%2Ff9f7dadd.jpg&caption=DSC00016

[Skreddy]

[edit: Oh, I see yours looks like an opamp model.  Nevermind!...]

I repaired one of those [a non-opamp model; sorry] last year and took pics of it.  Hopefully you can follow the wires and re-do yours.  I thought a BMP with a tone bypass would be great, but I found out that a good tone stack sounds way better than the bypass.  Anyhow, click in here and fish around...
http://happybob.com/skreddy/circuits/ElectroHarmonix/
The pictures called circuit and circuit-close should help.  I've got PSP and PSD files in there which overlay the components and the printed circuit, in case anyone needs that kind of info.