dangers of solder?

Started by talking_goat, July 29, 2004, 02:48:47 AM

Previous topic - Next topic

talking_goat

Are there any reported dangers of solder use? Long term affects? etc???
Anyone seen any research?

from a paranoid new comer

niftydog

nope.

don't eat it

wash your hands after using it

if you're doing a lot of soldering, get a fume extraction fan

otherwise, just try not to breath in the fumes.

I have a routine whereby I time my breathing with my soldering action. Breath out as the fumes are being created, breath in while you're cleaning the tip or whatever...

There's plenty of discussion about it on the net, but I can't refer you anything specific.
niftydog
Shrimp down the pants!!!
“It also sounded something like the movement of furniture, which He
hadn't even created yet, and He was not so pleased.” God (aka Tony Levin)

AL

Here is a link to a MSDS - the hazard exposure info is near the bottom. There are plenty of worse things on the planet. I've been soldering for years and my lung feels great!!  :)

http://www.frymetals.com/pdf_uploads/rosinfluxcoredsolderwireswrpwrmapwrapleadfree.PDF

AL

petemoore

I got a huge Roll of sweet lead solder...a little bit juicy and foamy, but flows real good.
 I rigged up a cooling fan [4''] and a bunch of 4'' tubes. the inlet is in a  Med large cardboard box
 the whole affair including getting the tubes took less than a few hours to build about a year ago.
 THE best way [according to soldermaster general...lol] IS the [fairly small diameter metal tube that sucks all air near the tip of the iron...the turns to flexible tubing so you can move the iron around...takes alot of suction I didn't have when I tried it with a 1/2 inch tube, so I tried the cooling fan method...try a cooling fan and 4 inch tube, I have enouhg air-draw to move the thing around about 4''- 6'' away from under the bottom of the opening before whisps escape.
Convention creates following, following creates convention.

Paul Perry (Frostwave)

People think lead is the problem, but the flux fumes are probably more of a worry.
www.lhc.org.uk/members/pubs/books/chem/chebbbba.htm