Hi,
This is my very first post in this great forum. I decided to dive into diy projects and I was able to make my very first PCB using the toner transfer method. I managed to build a TS-9 clone (from Tonepad) everything looks good except for there is no sound. I desoldered the byapass switch and soldered the battery wires, input and output straight to the board to make sure the issue is not coming from offboard wiring. I noticed that when everything is plugged in when I unplug and replug the battery I can hear the effect sound but just for a couple seconds and then it shuts off again. What could be the cause of this annoying problem? Please help. Thank you !
