Author Topic: PWM phaser in the works  (Read 53779 times)

Kipper4

Re: PWM phaser in the works
« Reply #60 on: October 27, 2014, 01:45:00 PM »
Bravo Freppo.
Can't wait to see the pcb.
"Duck_Arse
otherwise, you might end-up with SOIC or gullwings, for surface mounts."


Smoke me a Kipper. I'll be back for breakfast.

Grey Paper.
http://www.aronnelson.com/DIYFiles/up/

GodSaveMetal

  • Great Contributor!
  • ***
  • Posts: 244
  • Total likes: 4
  • Roberto Barrios Thays Lima -Perú
Re: PWM phaser in the works
« Reply #61 on: October 27, 2014, 03:31:06 PM »
I stay TUNED on this; FREPPO take your time man!!! THANKS!!!!!!!!!!!!

deadastronaut

Re: PWM phaser in the works
« Reply #62 on: October 28, 2014, 01:54:59 PM »
Where's the other 15 schemos.... :icon_mrgreen:

Can we add a depth. Resonance. And  a vol ...and a switched speed cap to get

Ludicrously slow sweep option.... :icon_ :icon_idea:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Kipper4

Re: PWM phaser in the works
« Reply #63 on: October 28, 2014, 03:16:29 PM »
Are you not forgetting something Rob?
"Duck_Arse
otherwise, you might end-up with SOIC or gullwings, for surface mounts."


Smoke me a Kipper. I'll be back for breakfast.

Grey Paper.
http://www.aronnelson.com/DIYFiles/up/

deadastronaut

Re: PWM phaser in the works
« Reply #64 on: October 29, 2014, 04:24:58 AM »
Pulsing led of course...a must have... ;)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

bluebunny

Re: PWM phaser in the works
« Reply #65 on: October 29, 2014, 04:44:41 AM »
Pulsing led of course...a must have... ;)

Just the one?   ;)

  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

deadastronaut

Re: PWM phaser in the works
« Reply #66 on: October 29, 2014, 07:15:17 AM »
Hmm...ive just setup my living room with rgb smd 5050 reels...20metres of the stuff...

Mrs Astro decided to have a Halloween party Friday...so I put that up...very cool..

But the best bit is I have a few metres spare so have been tinkering... :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

bluebunny

Re: PWM phaser in the works
« Reply #67 on: October 29, 2014, 09:00:56 AM »
. . .  so have been tinkering... :icon_mrgreen:

That's not like you, Rob.

Can't wait to see the results.  I have my welder's mask at the ready.   ;)
  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

Freppo

Re: PWM phaser in the works
« Reply #68 on: October 29, 2014, 04:01:14 PM »
Ok

Here is the new layout and it's verified!  :icon_biggrin:
http://parasitstudio.weebly.com/uploads/2/4/4/9/2449159/parasite_phaser_pcb.pdf

A demo video is coming.. but I want to box it up first, so it will take a while

Sorry, no LED rate indicator  :icon_razz: It's because LED needs to be buffered and inverted..
But I'll make a optional daughterboard for that on vero later..  :icon_wink:

/ Freppo
Check out my building blog at www.parasitstudio.se

Kipper4

Re: PWM phaser in the works
« Reply #69 on: October 29, 2014, 04:28:57 PM »
File damaged and could not be repaired message.
Adobe wouldnt open it.
Sorry Freppo
"Duck_Arse
otherwise, you might end-up with SOIC or gullwings, for surface mounts."


Smoke me a Kipper. I'll be back for breakfast.

Grey Paper.
http://www.aronnelson.com/DIYFiles/up/

~arph

Re: PWM phaser in the works
« Reply #70 on: October 29, 2014, 04:30:55 PM »
I can open it on my ipad just fine

GodSaveMetal

  • Great Contributor!
  • ***
  • Posts: 244
  • Total likes: 4
  • Roberto Barrios Thays Lima -Perú
Re: PWM phaser in the works
« Reply #71 on: October 29, 2014, 07:02:49 PM »
I SEE IT THANKS IS FINE; GREAT FREPPO!!!!!!!!!! AWERSOME!!!!!!!!!!

bluesdevil

Re: PWM phaser in the works
« Reply #72 on: October 29, 2014, 07:28:08 PM »
That's awesome!! Oh hell, I don't have CD4066 chip here!
I've been having a Freppo fest here all week building up the Ray Gun Chaos Fuzz and Black Current pedals.... good stuff.
I think I will try to put all the circuits in one box as a tribute build. :icon_twisted:
"I like the box caps because when I'm done populating the board it looks like a little city....and I'm the Mayor!" - armdnrdy

deadastronaut

Re: PWM phaser in the works
« Reply #73 on: October 30, 2014, 03:22:35 AM »
@freppo...nice one.. 8)

do you have the updated schemo, i'd like to bread this first..
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Freppo

Re: PWM phaser in the works
« Reply #74 on: October 30, 2014, 06:13:37 AM »
do you have the updated schemo, i'd like to bread this first..
Of course :)
schematic: http://parasitstudio.weebly.com/uploads/2/4/4/9/2449159/parasite-phaser-final.pdf

I've been having a Freppo fest here all week building up the Ray Gun Chaos Fuzz and Black Current pedals.... good stuff.
I think I will try to put all the circuits in one box as a tribute build. :icon_twisted:
Haha, that's awesome! :)
Check out my building blog at www.parasitstudio.se

deadastronaut

Re: PWM phaser in the works
« Reply #75 on: October 30, 2014, 06:33:00 AM »
cheers man.. 8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Kipper4

Re: PWM phaser in the works
« Reply #76 on: October 30, 2014, 10:47:04 AM »
Nice  work Freppo.
I'm away for a few weeks but I know I'm doing this as soon as possible.
I got all the PDFs working on iPad too. Lord knows why the PC won't open it.
Thanks mate and keep up the good work. It's high time there was a reasonable alternative to matched jellybean phasers.
"Duck_Arse
otherwise, you might end-up with SOIC or gullwings, for surface mounts."


Smoke me a Kipper. I'll be back for breakfast.

Grey Paper.
http://www.aronnelson.com/DIYFiles/up/

bluebunny

Re: PWM phaser in the works
« Reply #77 on: October 30, 2014, 11:24:31 AM »
Also on my (very long) list.

It's high time there was a reasonable alternative to matched jellybean phasers.

But if you want an alternative, Rich, check out Rick's "Causality" 13700-based phaser.
  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

deadastronaut

Re: PWM phaser in the works
« Reply #78 on: October 30, 2014, 11:34:49 AM »
^ i tried that on bread...it was more like wah filters to my ears, rather than phasey whoooshyness... :)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Kipper4

Re: PWM phaser in the works
« Reply #79 on: October 30, 2014, 12:57:02 PM »
Sound clip please Rob.
Thanks for the link Marc. looks intresting too.
« Last Edit: October 30, 2014, 01:24:33 PM by Kipper4 »
"Duck_Arse
otherwise, you might end-up with SOIC or gullwings, for surface mounts."


Smoke me a Kipper. I'll be back for breakfast.

Grey Paper.
http://www.aronnelson.com/DIYFiles/up/