Author Topic: Can this thingy be done?  (Read 1074 times)

JebemMajke

Can this thingy be done?
« on: March 15, 2015, 09:03:44 PM »
I've decided to make this kind of eq, because of simplicity, and because it has 2 eqs, which i think is very useful.



But i was wondering if i could add a third output, with a blend pot, like this



Or maybe a dual gang blend pot?

Because i feel like this add on would make this thing shine even more.

Edit

i was so tired last night, that i've used wrong links
« Last Edit: March 16, 2015, 04:25:50 PM by JebemMajke »

JebemMajke

Re: Can this thingy be done?
« Reply #1 on: March 16, 2015, 04:26:26 PM »
Just to bring it up to the beginning of the page.

Derringer

Re: Can this thingy be done?
« Reply #2 on: March 16, 2015, 05:54:36 PM »
what's the output impedance on something like that?

Try a simple blend pot and if it sounds so-so compared to the signals on their own., buffer the outputs of the two signals and use a low value blend pot like 10K - 25K.

Would you be running two different signals, like two separate guitars, at once here? Or are you making like a parallel signal type blend? In which case you may then need to consider one signal going out of phase from the other.

JebemMajke

Re: Can this thingy be done?
« Reply #3 on: March 16, 2015, 06:15:32 PM »
Two signals of a same bass/guitar.

R12, R13 would be around 20k

How to avoid that phase issue?

Derringer

Re: Can this thingy be done?
« Reply #4 on: March 16, 2015, 06:25:32 PM »
check out RunOffGroove's "Splitter-Blend "
http://www.runoffgroove.com/splitter-blend.html

it'll buffer, blend and allow you to flip the phase of one side