Author Topic: Tube Screamer drive do nothing  (Read 4301 times)

sukantsharma

Tube Screamer drive do nothing
« on: June 10, 2015, 02:52:25 AM »
I recently made a Tube Screamer Clone everything works fine expect Drive (nothing happen when i turn drive nob clock or anti clock wise).
Little distortion is always on.
Here is the Diagram of my circuit.
Please help me.
 :(

https://drive.google.com/file/d/0B1xxJQaxqrxMTF9XdVJmV2ZHOUU/view?usp=sharing
https://drive.google.com/file/d/0B1xxJQaxqrxMZFRDLXJKaUdUR0k/view?usp=sharing

Elijah-Baley

Re: Tube Screamer drive do nothing
« Reply #1 on: June 10, 2015, 03:32:29 AM »
Hi, and welcome! ;)

Tell us something more about your schematic, and more details.
- Did you copy the schematic somewhere? Did you have added some mods?
- It is you first pedal?
- What kind of board are you using (stripboard, PCB...)?
«There is something even higher than the justice which you have been filled with. There is a human impulse known as mercy, a human act known as forgiveness.»
Elijah Baley in Isaac Asimov's The Cave Of Steel

sukantsharma

Re: Tube Screamer drive do nothing
« Reply #2 on: June 10, 2015, 07:18:33 AM »
Thanks for the reply.
No this is my 4th pedal i had made Big Muff Pi etc.
I am using strip board.
Yes i copied it from here http://shop.pedalparts.co.uk/Tube_Screamer_TS808__TS9/p847124_7462506.aspx

Elijah-Baley

Re: Tube Screamer drive do nothing
« Reply #3 on: June 10, 2015, 10:01:38 AM »
And the veroboard (stripboard) layout was verified?
«There is something even higher than the justice which you have been filled with. There is a human impulse known as mercy, a human act known as forgiveness.»
Elijah Baley in Isaac Asimov's The Cave Of Steel