Author Topic: ridiculously simple cab sim : /  (Read 21287 times)

anotherjim

Re: ridiculously simple cab sim : /
« Reply #60 on: January 17, 2017, 07:44:01 AM »
Nearly finished ;)
Croeso i Diystompboxes.

If they didn't hear you then you didn't say it.

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #61 on: January 17, 2017, 07:47:23 AM »
you know me better than that ha ha,.... ;D


last night i was thinking of adding a mid control just for a laugh....

will try it later... ;)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

GibsonGM

  • more
  • Awesome!
  • *****
  • Posts: 5749
  • Total likes: 889
  • Mike Parker (aka. Guitar Mike, Parks, etc)
Re: ridiculously simple cab sim : /
« Reply #62 on: January 17, 2017, 08:00:44 AM »


PASSIVE DI = 100n nice n bassy...  470n nice n tight

LINE IN  = 100n nice n tight ....470n nice n bassy...

Well, you can't beat that, now can you? :) 

It's hard to know when something is "done", isn't it??
MXR Dist +, TS9/808, Easyvibe, Big Muff Pi, Blues Breaker, Guv'nor.  MOSFace, MOS Boost,  BJT boosts - LPB-2, buffers, Phuncgnosis, FF, Orange Sunshine & others, Bazz Fuss, Tonemender, Little Gem, Orange Squeezer, Ruby Tuby, filters, octaves, trems...

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #63 on: January 17, 2017, 08:03:27 AM »
yep it certainly is...

its like a painting...do i, or dont i...add a little....hmmmm....

or not.....hmmmm... :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

J0K3RX

Re: ridiculously simple cab sim : /
« Reply #64 on: January 17, 2017, 08:17:49 AM »
Was bored last night so I tried to make a little 1590A SMD layout for this.. Haven't really made a layout in a while so I did this as practice..  :icon_wink: If anybody wants it I will give a link to the diptrace file. You will probably end up needing it because Rob changes his mind like a woman changes clothes...  :icon_lol:





Doesn't matter what you did to get it... If it sounds good, then it is good!

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #65 on: January 17, 2017, 08:22:38 AM »
oi!.....true though.

 ;D


your gonna have to change that.......lots of times.. ;)
« Last Edit: January 17, 2017, 08:30:22 AM by deadastronaut »
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

vigilante397

Re: ridiculously simple cab sim : /
« Reply #66 on: January 17, 2017, 10:03:18 AM »
Was bored last night so I tried to make a little 1590A SMD layout for this.. Haven't really made a layout in a while so I did this as practice..  :icon_wink: If anybody wants it I will give a link to the diptrace file. You will probably end up needing it because Rob changes his mind like a woman changes clothes...  :icon_lol:



I'll definitely take you up on those diptrace files. I had a brief SMD phase and never got around to using up all my components :P
  • SUPPORTER
"I'm not sure what "serious design flaws" you see. Does it explode or poison your dog?" - PRR

www.sushiboxfx.com

askwho69

ridiculously simple cab sim : /
« Reply #67 on: January 17, 2017, 01:27:25 PM »
. "You will probably end up needing it because Rob changes his mind like a woman changes clothes...  :icon_lol:"

Funny hahaha but its true though


Sent from my iPhone using Tapatalk
"To live is to die"

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #68 on: January 17, 2017, 04:32:19 PM »
heres where i am.....after changing my dress over and over ;D

(mike, try this out see what you think....)



« Last Edit: January 17, 2017, 04:34:25 PM by deadastronaut »
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

2manygadgets

Re: ridiculously simple cab sim : /
« Reply #69 on: January 17, 2017, 05:03:07 PM »
I have to say, I'm really excited to try this out. The sound samples sounds fantastic!

I have a Rivera MiniRockRec which works great for recording because I'm using Two Notes Wall of Sound to simulate speakers in my DAW. I was hoping I'd be able to use it for late night practicing too so I don't wake up the family however even though the Mini does have a headphone jack, the speaker simulations don't work with it. They only put a low pass filter on the headphone jack and I think it sounds bad.

Looks like this is a line level signal but could I put this in between the headphone out of the MiniRockRec or would the signal coming from the headphone jack not be enough? Otherwise, I could plug this between the line out of the Mini and into my Interface. I have a headphone out from my Focusrite so I could use that. It would be great because as of now, using the Focusrite, I either have latency if I use WoS or I hear the unfiltered raw signal coming from the line out which also sound like crap of course.

I don't know much about building circuits like this, I literally ordered a cheap breadboard kit on Amazon today. I want to know, i don't see it mentioned, is the pot you have called out a linear or audio taper? Also when I called a small local shop about resistors/capacitors, I was asked if the resistors were 1/4 watt and what voltage the capacitors were. I could not tell from the schematic. I'm sorry if it was somewhere on the post and I missed it. I looked while I was on the phone but couldn't find any references to it.

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #70 on: January 17, 2017, 05:17:33 PM »
hi, the 'air' pot is a 1MA   A=LOG.   the 'mid' pot is a B= LINEAR.

1/4 watt resistors are perfect.

electro caps , get 25v-50v and you'll be fine.

yep, i have the same need, where i just want to plug in to a DI box or line in...(mixer)

for late night noodling, and just for convenience as sometimes i leave my amp
at friends /studio etc...but i always bring my pedals home..

i do have a digital multi fx board with cab sim built in, but i prefer my own dirts..


anyway, i'll test this more tomorrow...and see if my ears like it then. my ears change from day to day i find as i get older   ::) 8)

https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

GibsonGM

  • more
  • Awesome!
  • *****
  • Posts: 5749
  • Total likes: 889
  • Mike Parker (aka. Guitar Mike, Parks, etc)
Re: ridiculously simple cab sim : /
« Reply #71 on: January 17, 2017, 07:43:38 PM »
Oooh, a mid control!  FANCY!   I'll check that out soon, Rob...spent the day prepping and painting pine floors in my farmhouse...a little tired and in need of a beer or 4...my elec. room is up here where the floor paint is drying (volatile....ack..).

Nice work on that!  :)
MXR Dist +, TS9/808, Easyvibe, Big Muff Pi, Blues Breaker, Guv'nor.  MOSFace, MOS Boost,  BJT boosts - LPB-2, buffers, Phuncgnosis, FF, Orange Sunshine & others, Bazz Fuss, Tonemender, Little Gem, Orange Squeezer, Ruby Tuby, filters, octaves, trems...

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #72 on: January 17, 2017, 07:45:01 PM »
enjoy the beer man, sounds like you earned it...  8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

GibsonGM

  • more
  • Awesome!
  • *****
  • Posts: 5749
  • Total likes: 889
  • Mike Parker (aka. Guitar Mike, Parks, etc)
Re: ridiculously simple cab sim : /
« Reply #73 on: January 17, 2017, 08:52:07 PM »
enjoy the beer man, sounds like you earned it...  8)

Ya, pix later!  ;) 
MXR Dist +, TS9/808, Easyvibe, Big Muff Pi, Blues Breaker, Guv'nor.  MOSFace, MOS Boost,  BJT boosts - LPB-2, buffers, Phuncgnosis, FF, Orange Sunshine & others, Bazz Fuss, Tonemender, Little Gem, Orange Squeezer, Ruby Tuby, filters, octaves, trems...

askwho69

Re: ridiculously simple cab sim : /
« Reply #74 on: January 17, 2017, 10:05:04 PM »
 I think the cab needs more low end


Sent from my iPhone using Tapatalk
"To live is to die"

deadastronaut

Re: ridiculously simple cab sim : /
« Reply #75 on: January 18, 2017, 06:13:19 AM »
You may be right....i,ll listen again later, and post clips... :icon_confused:

get it on ya breadboard, join in... 8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

Re: ridiculously simple cab sim : /
« Reply #76 on: January 18, 2017, 08:05:30 AM »
I don't have breadboard right now, I will buy this week for much more fun . :)


Sent from my iPhone using Tapatalk
"To live is to die"

Hatredman

Re: ridiculously simple cab sim : /
« Reply #77 on: January 21, 2017, 12:23:09 PM »



We're all waiting for page 36...   ;)

Os this the title of a Syd Barrett song,?


here be .sig

Kirk Hammet invented the Burst Box.

2manygadgets

Re: ridiculously simple cab sim : /
« Reply #78 on: January 21, 2017, 08:26:25 PM »
I'm trying to put this together. I have little experience with bread boarding. I've built two pedals from kits but that's it so far. Any chance you could post a shot of how this circuit looks on the bread board? I tried doing a tutorial which helped some but I have many questions of how this should work.


Sent from my iPhone using Tapatalk

2manygadgets

Re: ridiculously simple cab sim : /
« Reply #79 on: January 24, 2017, 09:03:24 PM »
Did I ask for something that's totally gauche? This forum thread stopped completely after my last post asking about a picture of how to put this together on a bread board... Very sorry if this was out of turn.  :-\