Author Topic: Newby (question multisim)  (Read 1582 times)

Bob_86

Newby (question multisim)
« on: February 29, 2016, 05:17:36 PM »
Hello :)

My name is Sascha and i live in germany.

Iam very interested to build my own stompboxes and how they work etc.

Now Iam play around with multisim but i have a big problem with the simulation.

When i simulate it with the ossciloscope all is fine.
But when i put a capaticer into the input Stage to form a high pass filter the ossciloscope can nothing see.


I dont find the failure in the input stage. can someone help.
Iam really new in the electronics but iam verry interested how all works :)

greetz


potul

Re: Newby (question multisim)
« Reply #1 on: March 01, 2016, 09:17:07 AM »
If you can show us a screen capture of the circuit you are trying so simulate we might be able to help...


M.A.P

Re: Newby (question multisim)
« Reply #2 on: April 06, 2016, 09:31:05 AM »
Hi Sascha

as potul said please post a picture of your multisim simulation and a picture of the schematic you were simulating.

Gerne kannst du mir auch auf deutsch schreiben, ich benutze seit Kurzem auch Multisim, vielleicht kann ich weiterhelfen  ;)
EDIT: You're welcome to write to me in German. I'm using Multisim for a short time and maybe I could help

Sorry, I didn't had the time to translate it because it was one minute to finishing time  ;D

Greetings
Marcus
« Last Edit: April 06, 2016, 05:37:30 PM by M.A.P »

mcknib

Re: Newby (question multisim)
« Reply #3 on: April 06, 2016, 04:27:47 PM »
+1 on pictures

and please do

Gerne kannst du mir auch auf deutsch schreiben, ich benutze seit Kurzem auch Multisim, vielleicht kann ich weiterhelfen

Write it in German not that I'll be of any further help in German like M.A.P, I've never used Multisim, never mind recently but I like to see if I can still translate it having not spoken regularly auf deutsch for around 30 years and of course learn a little about circuit simulation using Multisim