Author Topic: Program selection with the FV1  (Read 1024 times)

Benoi31

Program selection with the FV1
« on: December 04, 2016, 06:04:47 AM »
Hello everyone,

I am sorry for what might be a very naive question, but I cannot find the answer anywhere.
I want to do a 6 programs FV1, so I need to select specific programs.

What bytes corresponds to which program?

(ex : "111" = Program 1, "001" = Program 4....etc, from Program 0 ( Chorus Rev in the prebuilt programs) to 7 (Reverb 2)

Thank you very much!
« Last Edit: December 04, 2016, 06:08:10 AM by Benoi31 »

Ice-9

Re: Program selection with the FV1
« Reply #1 on: December 04, 2016, 06:20:43 AM »
The S0-S2 program select lines start at '000' for program 1 (which is actually effect program 0) see table below for full list



000 = 0
001 = 1
010 = 2
011 = 3
100 = 4
101 = 5
110 = 6
111 = 7

The S0-S2 are standard binary counting up from 000 to 111
www.stanleyfx.co.uk

It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

Benoi31

Re: Program selection with the FV1
« Reply #2 on: December 04, 2016, 06:24:52 AM »
Thank you very much, can continue my project now!  :)