Author Topic: Zound Zkulptor Booster  (Read 422 times)

MJ_Sound_Cubed

  • Contributor
  • **
  • Posts: 66
  • Total likes: 22
  • Build THINGS, Make MUSIC, Open Audio Hardware :)
    • SoundCubed.com
Zound Zkulptor Booster
« on: September 17, 2018, 05:52:06 PM »
A good guitar booster should adapt to its position, and to the needs of the guitar and guitar player.

The ideal booster needs to reflect the Fletcher–Munson curves, because since the ear hears different frequencies at different levels, when the guitar signal is amplified it should remain pleasant and equivalent.

I decided to use a MOS-fet because the bias, impedance and sound can be altered and adapt any guitar pickup and playing style.

A prototype was created after investigating a bit some popular boosters.





More here https://soundcubed.com/zound-zkulptor-booster/.
« Last Edit: September 17, 2018, 06:04:38 PM by MJ_Sound_Cubed »
♫♪.ılılıll|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅|llılılı.♫♪

MJ Sound Cubed
--------------------------------------------
Community driven website to share your work at soundcubed.com