Author Topic: ADAU1452 + AD1938 universal board  (Read 629 times)

Vlad Koen

ADAU1452 + AD1938 universal board
« on: February 15, 2019, 06:39:47 AM »
After I got success with ADAU1701 guitar multi effect board (old called tank chorus), I decided to experiment with ADAU1452 processor.
Now I make GERBER file and send it to production.
In principal, it is adau 1452 mini z board, but with 6 auxad and 6 mp inputs for external control.
And 23lc1024 memory for long delay and quality reverb.

In a month it will be tested.


Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #1 on: March 06, 2019, 03:46:58 PM »
Hi everybody !
Yesterday I got my order from PCB fabric and now my project already working!
I did very simple test sketch in the Sigmastudio and I must say it is sound very very wonderful.
Mach more better than project on ADAU1701.
Were was 3 mistakes in the PCB  routing, and it mast be correct in v2 PCB.Now I sketch web page on google sites, there would to be  all in files (kikad  and gerber).
I think that pages  would be the name somethink like " DIY elektronic sound devices".









Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #2 on: March 06, 2019, 05:54:48 PM »
Simple 2 point delay just for test




https://youtu.be/Fuacg2PJQ0A

mth5044

Re: ADAU1452 + AD1938 universal board
« Reply #3 on: March 06, 2019, 06:11:01 PM »
Cool! I don't know much about this whole thing, but I like the visual programming.

Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #4 on: March 08, 2019, 03:14:57 PM »
Rever + delay + shimmer

https://youtu.be/J_aYPzY56w4

Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #5 on: March 13, 2019, 09:55:52 AM »
next edition of PCB

corrected some mistakes and added codec cs4270 as alternative of ad1938 (for future experiments)





siro78

Re: ADAU1452 + AD1938 universal board
« Reply #6 on: March 18, 2019, 06:11:50 AM »
Good work.
Can I ask to you where have you connected the external SRAM and wich SigmaStudio configuration is needed?

Thanks

slacker

Re: ADAU1452 + AD1938 universal board
« Reply #7 on: March 18, 2019, 02:34:47 PM »
Looks interesting, nice work. Is that an FX2 development board being used as a programmer?

Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #8 on: March 19, 2019, 01:30:01 PM »
Good work.
Can I ask to you where have you connected the external SRAM and wich SigmaStudio configuration is needed?

Thanks

it's a difficult way)) it took me 2 hours to solve the problem.

1.Before all, there must be pull up resistor to pin 2 /so/ because 23lc1024 have only open collector, probably.
It is r7 on v2 pcb new design.
2. cs of 23lc1024 connected to mp11 in my case
3. in control table adau1452 in sigma studio mp11 I configurated as cs2 and no more! it ic must be multipopose port!
4. in exeternal delay unit I gave adress 1.

in this configuration all wotking perfectly, and self boot too.


Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #9 on: March 19, 2019, 01:32:39 PM »
Looks interesting, nice work. Is that an FX2 development board being used as a programmer?

it is chip USBI interface connected by I2s mode

boga

Re: ADAU1452 + AD1938 universal board
« Reply #10 on: March 29, 2019, 01:11:25 PM »
Really nice job, Vlad!  ;)

You are planning to make it open source as I understand?

Are you planning to experiment with impulse response and amp / cab simulation also?

Vlad Koen

Re: ADAU1452 + AD1938 universal board
« Reply #11 on: March 30, 2019, 09:31:41 AM »
Really nice job, Vlad!  ;)

You are planning to make it open source as I understand?

Are you planning to experiment with impulse response and amp / cab simulation also?

yes it would be open source project . just I'll test new version PCB and maybe  new  box.

about impulse response I did not try it, but in Sigmastudio there is FIR filters.

amp and cab simulation I did from soft limiter and filters, it is works wonderful .

boga

Re: ADAU1452 + AD1938 universal board
« Reply #12 on: March 30, 2019, 10:47:26 AM »
Supercool! Can't wait to see your homepage already.   :icon_biggrin: ;)