Author Topic: Build Report / Demo - Jordan Bosstone on Leather Eyelet!  (Read 886 times)

Chris Brown

Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« on: March 30, 2019, 03:26:40 PM »
I love the bosstone!! I started with the Nashville schematic. I changed the in/out to .1uf. I added a 47uf and a reverse polarity diode across the power rails. I ended up with a 30K resistor across the 100k voltage sag pot in series with a 2k to limit it to about 25k which is what I measured as my sweet spot for trumpeting.




« Last Edit: March 30, 2019, 11:11:25 PM by Chris Brown »

PRR

Re: Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« Reply #1 on: March 30, 2019, 06:49:30 PM »
For whatever reason, the YouTube tag (or my browser?) now wants "https://"
« Last Edit: March 31, 2019, 01:20:50 AM by PRR »
  • SUPPORTER

Chris Brown

Re: Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« Reply #2 on: March 30, 2019, 11:13:54 PM »
Thanks! I updated the original post... My home browser was fine but I realize now that my phone browser wants htrps

amptramp

Re: Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« Reply #3 on: March 31, 2019, 04:24:46 PM »
Now you are ready to belt out those tunes.

I'll get my coat...

rutabaga bob

Re: Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« Reply #4 on: April 01, 2019, 01:32:04 PM »
Seen the KMA ‘Fuzzly Bear’?
Life is just a series of obstacles preventing you from taking a nap...

“I can’t resist a filter” - Kipper

Chris Brown

Re: Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« Reply #5 on: April 01, 2019, 01:43:03 PM »
Seen the KMA ‘Fuzzly Bear’?

Just looked it up... awesome sounding bosstone! I'm amused at what each builder decides to call the voltage control... KMA went with skin/meat lol

giudis

Re: Build Report / Demo - Jordan Bosstone on Leather Eyelet!
« Reply #6 on: June 26, 2020, 07:23:25 AM »
Wonderful job, Chris!

Did you use 1N4001 for clipping?
And did you connect the sag 1 pin with 30k and 2k? I did't understand very well, could you make a little schem, please?
thanks so much and congratulation again for your leather sound pedal!!!  :icon_lol: :icon_biggrin: