Author Topic: Help with my Small Clone!  (Read 172 times)

Jere-del-fuego

Help with my Small Clone!
« on: September 08, 2019, 06:27:55 PM »
I recently bought a Small Clone i've already modified it changing the depht switch for a pot. (I changed the color of the led too 8) )
I noticed when it's on it applies kind of a Low pass filter and my guitar lose tone and body. When it's bypassed the guitar sounds normally.
Any mod i can do to solve this problem?

*I'm a real begginner (and spanish) so please don't talk to much technically  :icon_biggrin:


Scruffie

Re: Help with my Small Clone!
« Reply #1 on: September 08, 2019, 08:52:07 PM »
Yes! I will talk technically for a second for others, for some reason the reissue doesn't use equal pre & de-emphasis compared to the original which rolls of highs on the dry signal.

For you, there's a 9k1 resistor on the right side of the board under the 4558 if I recall correctly, change it to a 6k8.

Jere-del-fuego

Re: Help with my Small Clone!
« Reply #2 on: September 09, 2019, 11:35:13 AM »
Thanks for your answer i'll try it! :)