Author Topic: Stock - Must have at home  (Read 1171 times)

flongo

  • member
  • *
  • Posts: 1
Stock - Must have at home
« on: September 05, 2019, 09:27:06 AM »
Hi Guys

I just started doing my own stompboxes. I don't know what do do next, but I will do somtething in future. The problem is, shipping costs are very high where I live.
Now, what should I order? What do you think, which parts are the must haves at home to start a new , simple project?

I think resistors with all possible values, some IC's and capacitors will do it. But which ICs, etc. What do you have always at home?

Cheers

antonis

  • Poster2
  • **
  • Posts: 2795
  • Antonis D. - Greece
Re: Stock - Must have at home
« Reply #1 on: September 05, 2019, 11:48:58 AM »
What do you have always at home?

BEER..!!!
(for welcome new members..) :icon_wink:

E12 series resistors & E6 series capacitors should be fine..
(don't get to high for electro caps values - up to 470μF at 16 or 25V..)

2 - 3 100k linear pots..

For IC's any general purpose op-amp, like TL072/082, should be O.K.
(in most cases, do prefer dual op-amps even if circuit calls for single ones..)

Also, some small signal amplifier n-p-n BJTs, like 2N3904, 2N5088/89, MPSA13/14..
(ok, and a couple of 2N3906 p-n-p for the shake of "just because"..) :icon_wink:

1N4148 & 1N4004 Diodes and a variety of coloured LEDs..


Of course, the above just scratch the surface and be prepared to have handy enough blank Excell sheets..  :icon_biggrin:
« Last Edit: September 05, 2019, 11:54:42 AM by antonis »
Can't follow your signature changes, Stephen..!!
but I like what follows:
"put the coffee down, Antonis, and nobody will get hurt."
"Arggg, Jim ...."