My first pedal: LPB-1 but no sound?!?!?!

[mushjoon]

Hi everyone, I just bought my first breadboard a few days ago and I decided to build LPB-1 for my first ever project. For the schematic, I used Beaves Audio's LPB-1 schematic.

http://beavisaudio.com/schematics/Electro-Harmonix-LPB-1-Schematic.htm

However, after wiring them as best as I could, no sound came out after plugging it into an amp.

My biggest suspicion is that I bought wrong type of input/output jacks. Here's the link to the exact model that I bought and it's the first schematic.   

https://www.eleparts.co.kr/goods/view?no=67840

Of course, there's also a high chance that I simply wired them all wrong.

Can you please help me out?

Thank you.

[deadastronaut]

hi you need to connect the +9v and gnd to the other rails too.......(red and blue)

your power is only connected to the 1 set of +9v and gnd with battery....


and the layout looks wrong.  hang on i'll see what i can do for you...

we will get you going . 

[deadastronaut]

here you go, try this....

[antonis]

I like Rob's capacitors..
(20W resistors should be jealous for caps 16mm spacing..)

P.S.
Maybe some jumpers berween PS pads quintets should be helpful..
(just in case of...)

[deadastronaut]

  they were the only ones i could find ha ha....adds mojo. 

but hey if he gets the idea..