Author Topic: Dead end FX PLL ONE - Drone Swap Switch question  (Read 190 times)

elbenoly

Dead end FX PLL ONE - Drone Swap Switch question
« on: November 25, 2020, 04:05:09 PM »

Hi all!

Question, hopefully I didn't miss something obvious somewhere. 
I'm trying to figure out how to hook up the drone swap switch for the Dead End FX PLL One.  I need to wire up a 3PDT foot switch to it, but I'm not sure what the mapping is.  I only need 6 of the 9 lugs, would it just be 1 through 6?  Thank for any help!




digi2t

  • Awesome!
  • ****
  • Posts: 4659
  • Total likes: 1365
  • "Digital? Any idiot can count to 1!" - Bob Widlar
Re: Dead end FX PLL ONE - Drone Swap Switch question
« Reply #1 on: November 25, 2020, 06:46:10 PM »
Only 6 lugs required. Or, use a DPDT. Otherwise, can't connet whatcha ain't got. :icon_wink:
  • SUPPORTER
Dead End FX
http://www.deadendfx.com/

Asian Icemen rise again...
http://www.soundclick.com/bands/default.cfm?bandID=903467

"gigantically smaller."  - pinkjimiphoton

"The more "slam" you can get, the better." - anotherjim

elbenoly

Re: Dead end FX PLL ONE - Drone Swap Switch question
« Reply #2 on: November 26, 2020, 10:52:52 PM »
Thanks!  Love your stuff BTW, I have a Laika and a String Ringer on my desk for when I finish this one.