Author Topic: Microphone Preamp Question  (Read 297 times)

thewaronfuzz

Microphone Preamp Question
« on: March 13, 2021, 03:58:12 PM »
Hello everyone. First time poster here.

I am attempting to build a microphone preamp pedal for live use. I have built this microphone preamp here: http://guitar-fx-layouts.42897.x6.nabble.com/Microphone-preamp-vero-layout-td5181.html

It sounds great but I am wanting to know if it is possible to add some form of effects loop to it so I can take an unbalanced signal from the INA217 preamp section, run it through some external effects, and then run it back to the balanced output section? I hope that makes sense.

Any help or advice would be much appreciated!

iainpunk

Re: Microphone Preamp Question
« Reply #1 on: March 13, 2021, 04:36:51 PM »
do you have an actual schematic?
that would be what we need at the very least to answer the question.

cheers
half man - half snail - 6 feet to scale - Snail man's - not frail - He's been - to jail - snail man is fuccing real
『snailpilled』

PRR

Re: Microphone Preamp Question
« Reply #2 on: March 13, 2021, 09:12:30 PM »
> add some form of effects loop

C4.
  • SUPPORTER

thewaronfuzz

Re: Microphone Preamp Question
« Reply #3 on: March 14, 2021, 05:44:43 AM »
> add some form of effects loop

C4.

I thought it would be around there. I've trying adding a send and return from C4 but not getting anything to work. Any ideas how I could go about wiring it up?

iainpunk

Re: Microphone Preamp Question
« Reply #4 on: March 14, 2021, 03:11:06 PM »



this would probably work
half man - half snail - 6 feet to scale - Snail man's - not frail - He's been - to jail - snail man is fuccing real
『snailpilled』