Author Topic: Fetzer  (Read 124 times)

brujo

Fetzer
« on: April 08, 2021, 01:23:43 PM »
Hi,today I tried this build http://2.bp.blogspot.com/-UH5ryBa1rkI/VXpsYZcJGBI/AAAAAAAAAPE/HFF3j6jfDDg/s1600/FETZER%2BVALVE%2BVERO.GIF using a j201 and a 44uF electrolitic cap instead of a 22uF. I connectd the board to a 3pdt footswitch and bypassed signal is going thru,but no effected one,just a bzzz that respond to volume pot. What could I check? Honestly I also tried with a perfboard but nothing changed,so i think I'm doing something wrong,I am really frustrated.. :icon_cry:
thank you everybody






bluebunny

Re: Fetzer
« Reply #1 on: April 09, 2021, 04:26:53 AM »
I'm going to move this to the main board where you'll get far more passing traffic and replies.  When you get there, check out the sticky "Debugging..." thread and follow the instructions, then post what you find.
  • SUPPORTER