Author Topic: Show me your 1590LB enclosures/pedals  (Read 26730 times)

Elijah-Baley

Re: Show me your 1590LB enclosures/pedals
« Reply #60 on: May 02, 2021, 06:38:55 AM »
Thank you, this picture help me a bit. ;)
I always test the position of the parts like you're doing in the picture, too. At least with 1590A enclosure. With bigger enclosure just if there are a lot of thing inside.

I will buy a cheaper equivalent. I could but the 51x51mm, but there's another slightly bigger, 60x55, unfortunately the height is 30mm, not 32mm.
Probably I can draw a layout after I have bought one of these enclosures.
«There is something even higher than the justice which you have been filled with. There is a human impulse known as mercy, a human act known as forgiveness.»
Elijah Baley in Isaac Asimov's The Cave Of Steel

Bricksnbeatles

Re: Show me your 1590LB enclosures/pedals
« Reply #61 on: May 25, 2021, 11:33:57 AM »
Just awaiting some new footswitches and the paint for my upcoming 1590LB builds. In the meantime, I’m making a bunch of light plates. Here’s a test using a laser pointer yesterday.

Hey everybody!

jimilee

Re: Show me your 1590LB enclosures/pedals
« Reply #62 on: May 26, 2021, 09:59:16 PM »
Here's the oxygen amp from Quantum fx. It's an MXR headphone amp that runs at 35 volts.






Elijah-Baley

Re: Show me your 1590LB enclosures/pedals
« Reply #63 on: May 27, 2021, 04:03:08 AM »
In my next order I'm going to buy my first 1590LB type enclosure for a little project.
Maybe, I would like to buy a second one to fit in it a LPB-1 circuit.
Who want to suggest to me another simple project for this small box? :D
«There is something even higher than the justice which you have been filled with. There is a human impulse known as mercy, a human act known as forgiveness.»
Elijah Baley in Isaac Asimov's The Cave Of Steel

rockola

Re: Show me your 1590LB enclosures/pedals
« Reply #64 on: June 08, 2021, 01:30:44 AM »
In my next order I'm going to buy my first 1590LB type enclosure for a little project.
Maybe, I would like to buy a second one to fit in it a LPB-1 circuit.
Who want to suggest to me another simple project for this small box? :D
SHO  :icon_mrgreen:

Elijah-Baley

Re: Show me your 1590LB enclosures/pedals
« Reply #65 on: June 08, 2021, 03:48:31 AM »
Thanks, I built it in a 1590A. :)
«There is something even higher than the justice which you have been filled with. There is a human impulse known as mercy, a human act known as forgiveness.»
Elijah Baley in Isaac Asimov's The Cave Of Steel

thomasha

Re: Show me your 1590LB enclosures/pedals
« Reply #66 on: September 28, 2021, 09:55:41 AM »
Finished the equinox II build.






bluebunny

Re: Show me your 1590LB enclosures/pedals
« Reply #67 on: September 28, 2021, 11:31:03 AM »
 :icon_eek:

 :icon_cool:
  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

bk_devices

Re: Show me your 1590LB enclosures/pedals
« Reply #68 on: February 12, 2022, 08:10:16 PM »






Probably never doing another 1590LB build after this one lol. There's a thickness control on the bazz fuss side, and both the preamp and the bazz fuss can be disabled/enabled with the toggles. Knobs are from Kilo International. The PCB is a little SMD board tucked into the corner. Most of the guts are just messy offboard wiring and components.