News:

SMF for DIYStompboxes.com!

Main Menu

micro synth

Started by freeradical24, March 29, 2004, 10:02:37 PM

Previous topic - Next topic

Maneco

well,tou can sub all of them,many won´t need anything extra,and others will need the two transistors buffer,as seen on the ca3094 datasheet,if i remember well,the one on the envelope generator and the three on the low pass filter...all the others take the output before the transistor buffer,so you can use directly a ca3080...

PB Wilson

I just saw this thread and would love to get a layout and schem.

Thanks.

PB Wilson

bump for those late to the party

freeradical24

i actually saw the other pages.but all that is on them is text.
what software should i be using to open a ppt file?maybe thats my problem.

Bill Bergman

PB, I'll send it to you tomorrow.

Freeradical, you need to open it with Microsoft  PowerPoint.

Bill Bergman

Hey swt,
I just noticed that on the file that I have been sending everyone that on the first page, second layout I have some traces in pink.  Hopefully this not is a version I was woking on (along time ago when I did this) to corect problems. It might possibly be some correctins from information you gave me.

Is this the same on the one I sent you awhile back?

shawsofhell

hey could i get a copy as well please?

shaw@argo.net.au

zipphreak

bump think i could still get a copy of this, that would be awsum

zipphreak@comcast.net


thanks,
zipphreak

Arn C.

Hey Bill  !!!
   If you get a chance I would also be interested in what you have also!

Thanks!
Arn C.

Bill Bergman

Arn, Zipphreak and Shawsofhell (hope your not the devil), I sent you the files but Shaws' bounced back.

Arn C.

Thanks Bill,  got them!!!!

Arn C.

SpiderBass

If someone can send to me the Zip  :D

Thanks

spiderbass@free.fr

Nobody try with vertical potentiometer ?

ryanscissorhands

I'd like a copy too please.

ryanscissorhands@hotmail.com

Thanks so much.

SpiderBass

Thanks so much  8)

aaronkessman

heh. me too. thanks!

fuzz_a   at  y a h o o

Dutchie

and while you're at it.....  :wink:

yvo ( a t ) raketnet.nl

thanks!!!!

dr

....Bill, is the layout that FP did correct?...and are all the IC's CA3094's on that one? his layout didn't specify..thanks!.......dr....

Bill Bergman

DR,
I think they reference to the #'s on the schematic. I'll have to check.

Bill Bergman

Yep, there on the schematic.

dr

....Bill, which schematic are you referring to; I have the powerpoint file from a while back,and I don't recall it had a copy of the schematic,just layouts of the board.....is the schematic you're referring to available anywhere? I have some of the CA3094's and would love to build it!.....thanks!......dr....mrodgers@wcnet.org