« previous next »
Pages: [1]   Go Down

Author Topic: Easyface build pics  (Read 4237 times)

erix

Easyface build pics
« on: May 19, 2004, 02:30:03 PM »
I've been lurking around the stompbox boards for several years now but this is my first stompbox. It is Joe G.'s Easyface with input blend control and 'Volt' control (like the 'Stab' control on a Fuzz Factory) all on a tiny layout of my own design.

I really enjoyed hand-painting the artwork.

I laid out the artwork in Illustrator, printed it to size, taped it on top of the box and cut through the paper and into the paint with a sharp Xacto knife. Then I followed the lines from the knife with a 000 brush and Testors model paints.

Inside it's wire, jacks, pots and trannies from Smallbear and way-too-tiny Wima tone caps from my junk box.

Looking forward to building more!

ok,
erix
Logged

jimbob

Easyface build pics
« Reply #1 on: May 19, 2004, 02:36:05 PM »
very nice! I know its not easy to paint letters as you did-atleast not for me-

very kool!
Logged
"I think somebody should come up with a way to breed a very large shrimp. That way, you could ride him, then after you camped at night, you could eat him. How about it, science?"

petemoore

Good One !!!
« Reply #2 on: May 19, 2004, 02:36:45 PM »
Hot and Cool Hues !!!
  Great Job !!!
  The knobs reflections in the Pics look trick...Great photo.
Logged
Convention creates following, following creates convention.

AL

Easyface build pics
« Reply #3 on: May 19, 2004, 02:38:08 PM »
Whoa !!!  Nice looking box  8)  on the outside and inside. I wish my first box looked half that good. Good job cramming all that in there too.

AL
Logged

Samuel

Easyface build pics
« Reply #4 on: May 19, 2004, 02:59:18 PM »
i like that your electrolitic caps match the paint job!
Logged

Doug H

  • Guest
Easyface build pics
« Reply #5 on: May 19, 2004, 03:10:59 PM »
That looks really nice. :D  Congrats on being able to fit it all in a 1590B.

Doug
Logged

Paul Marossy

Easyface build pics
« Reply #6 on: May 19, 2004, 03:34:49 PM »
Very cool stuff. Looks kinda Z. Vex-ish...  :wink:
Logged

u1061810

  • Guest
1
« Reply #7 on: May 19, 2004, 05:36:35 PM »
Nice job! I dig the lettering job-ULTRA FINE!
Logged

Hal

Easyface build pics
« Reply #8 on: May 19, 2004, 06:30:43 PM »
yea, i also thought it looked like Z Vex's stuff.

Sweet job.  I wish i was blessed with nice handwriting ;)

What exactly is hte "volt" control, pre-gain ?
Logged

Peter Snowberg

Easyface build pics
« Reply #9 on: May 19, 2004, 06:48:04 PM »
Beautiful work! 8) 8) 8)

The finish is totally pro looking! :D

Take care,
-Peter
Logged
Eschew paradigm obfuscation

brett

Easyface build pics
« Reply #10 on: May 19, 2004, 07:32:40 PM »
Masterpiece. You should be very proud of this baby  8)
Logged
Brett Robinson
Let a hundred flowers bloom, let a hundred schools of thought contend. (Mao Zedong)

bobbletrox

Easyface build pics
« Reply #11 on: May 19, 2004, 09:07:29 PM »
Even your caps match the paintjob!  Nice  :o

You have a steadier hand than I -that's for sure.
Logged

Lonestarjohnny

Easyface build pics
« Reply #12 on: May 19, 2004, 10:00:48 PM »
Super job on the paint and lettering,
JD  8)  8)
Logged

erix

Easyface build pics
« Reply #13 on: May 20, 2004, 08:49:13 AM »
Thanks for the kind words everybody!

>What exactly is hte "volt" control, pre-gain ?

That's a 5K pot in series with the +9V wire from the battery. It starves the circuit for power and gives you spattery, fizzy, kludgey kind of tones depending on where it's set.

erix
Logged

theaxeman

Easyface build pics
« Reply #14 on: May 20, 2004, 10:12:49 AM »
*Drool*

 8)  8)
Logged
Pages: [1]   Go Up
« previous next »