Modded Park G10.

Started by Steben, September 04, 2004, 07:58:48 AM

Previous topic - Next topic

Steben

Hi there,

Out of the bleu: I just made some changes within my little Park G10. (Can we call this ss amp "vintage" junk by now? :wink: )

I replaced the first JRC4558DD (pretty bad sounding) IC with a KA4558.

I ripped the diodes and changed them with red LED's in series with a 68k resistor. Parallel to this resistor I placed back the 1N4148's in. Now there is soft clipping at 1.5V signal and hard beyond 2.1V. Sounds pretty great in comparison to the stock amp!

-----|<|------           //
                 |-------|<|----------
-----|>|------           //            |------
                 |-------|>|----------
----^^^^----
  • SUPPORTER
Rules apply only for those who are not allowed to break them