Author Topic: tremulus lune differences  (Read 2449 times)


tremulus lune differences
« on: March 08, 2005, 06:58:59 PM »
Hey guys-

What are the tonal differences of these circuits....which on is better??

They both clame to be the 4ms temulus I believe.  I'm look for a good trem to build.  Anyone have experience or info on either of these?

Thanks guys.


tremulus lune differences
« Reply #1 on: March 08, 2005, 07:26:18 PM »
Here's another one for you:


tremulus lune differences
« Reply #2 on: March 27, 2005, 07:47:52 PM »
What is the difference between the stereo tremulus lune and the stereo tremulus panneur?


tremulus lune differences
« Reply #3 on: March 28, 2005, 12:30:55 AM »
Is there a difference in the schematics? Should be the same thing...


  • Guest
tremulus lune differences
« Reply #4 on: March 28, 2005, 03:20:01 AM »
I'm sure they will be layouts from the same schematic.

The version with two audio channels can be used in two ways:
1) with one LFO driving both channels, meaning the trem will be in sync, but out of phase -> panning -> panneur
2) with each channel operating on a separate LFO -> 'stereo'

The sync (one LFO) / un-sync (two LFOs) operation can be setup to be switched in and out for maximum flexibility.



  • Great Contributor!
  • ***
  • Posts: 271
  • Total likes: 0
  • Dee-eye-why-peddle-maker.
    • Free drum loops
tremulus lune differences
« Reply #5 on: March 28, 2005, 06:13:45 AM »
I built a Tremulus Lune from the layout at Tonepad, I think because they have a pdf with everything together: Schematic, layout, bill of materials, etc.
It was also the first time I etched my own board!  8)  Not so difficult actually... But anyway, as far as I can see, the schematic is identical to the one at commonsound (the original!). I think there may be differences in a couple of component values, but that could be due to revisions at commonsound.

And don't forget the excellent commonsound forum! 8)

Check out some free drum loops and other sounds at my site: