Pictures!

[solderman]

Thank you. And no, no ROG. Something boohteekier ...

OK thought I saw a double 4049 circut an the Double D is one of them

[azrael]

^Hey, just wanted to say I was in the 1590A thread, loved your pedals! I went and bookmarked your site...I'll have to give one of your layouts a try sometime!

[solderman]

^Hey, just wanted to say I was in the 1590A thread, loved your pedals! I went and bookmarked your site...I'll have to give one of your layouts a try sometime!

Thanks for the kind words. That's what its all about sharing so be my guest.

[Fuzzy-Train]

Every part of that build is artful.  Congrats on the killer looking (and I'm assuming sounding, as well) pedal.

Thanks a lot man! And thanks for the layout!

It sounds fantastic!!

[noelgrassy]

John did an excellent job etching and SpencerPedals made a kick ass layout!

I'm tempted to try another one with ceramic caps.

Here's a really close up shot of the underside.

John's made me some boards too and don't intend to get them made anywhere else. His work is top notch not only in that department but the pedals and instruments he's done are museum grade quality with a savage helping of "jaw dropping". See the snakeskin covered axe he did for instance. That puppy was virtually seamless in the pics I saw.
Look no further when you need custom PCBs friends. He will make your project attain that next level approaching the "Pro" build.

[Kitarist]

Lots of great builds in here!!!

[SonicVI]

SupaFuzz and Vox Tone Bender in one box.

[solderman]

SupaFuzz and Vox Tone Bender in one box.

This is fantastic. You have really captured the old school look. If you relic them they will practically go as originals.

[ShortScaleMike]

Here is a demo of this pedal:
http://www.youtube.com/watch?v=CDlnmIn84LU

[kurtlives]

SupaFuzz and Vox Tone Bender in one box.

DAM that looks good!

[MicFarlow77]

John did an excellent job etching and SpencerPedals made a kick ass layout!

I'm tempted to try another one with ceramic caps.

Here's a really close up shot of the underside.

John's made me some boards too and don't intend to get them made anywhere else. His work is top notch not only in that department but the pedals and instruments he's done are museum grade quality with a savage helping of "jaw dropping". See the snakeskin covered axe he did for instance. That puppy was virtually seamless in the pics I saw.
Look no further when you need custom PCBs friends. He will make your project attain that next level approaching the "Pro" build.

+1000 on John's work... and to top it off, he is one very nice doode!

[tranceracer]

Here is a demo of this pedal:
http://www.youtube.com/watch?v=CDlnmIn84LU

Great Demo!  Really can hear what this box can do!  What was your signal chain?  Did you mic an amp or go straight to a recorder?

[tehfunk]

John did an excellent job etching and SpencerPedals made a kick ass layout!

I'm tempted to try another one with ceramic caps.

Here's a really close up shot of the underside.

John's made me some boards too and don't intend to get them made anywhere else. His work is top notch not only in that department but the pedals and instruments he's done are museum grade quality with a savage helping of "jaw dropping". See the snakeskin covered axe he did for instance. That puppy was virtually seamless in the pics I saw.
Look no further when you need custom PCBs friends. He will make your project attain that next level approaching the "Pro" build.

+1000 on John's work... and to top it off, he is one very nice doode!

Agreed!

[free electron]

Already the 3rd generation of hybrid analog/digital phasing:
-4/6/8 stages,
-3 working modes (normal, tap tempo, EXP controlled),
-internal/external tap tempo with subdivisions,
-expression pedal input, in normal mode works as an LFO freeze switch, 
-relay true bypass

[DWBH]

HOLY CR*P!!

[frequencycentral]

  OMG! Are you some kind of pedal building android or something? That is such a piece of work. 

[musiclikscreams]

i've been staring at that for the past 10 minutes... props

[Br4d13y]

.............

[rousejeremy]

Green Ringer with Dragonfly style swirl paint and Joe Davisson LED trick. I got this plastic enclosure from the source. It's small, the battery would only fit in lengthwise.

[Thomeeque]

 Hi!

It's my "EM1022" (Electric Mistress clone, TDA1022 based)



Click for more..

T.