Author Topic: Pictures!  (Read 10839669 times)

Ripthorn

Re: Pictures!
« Reply #10660 on: October 03, 2009, 12:19:44 AM »
Gonna do some snake skin cable?
Exact science is not an exact science - Nikola Tesla in The Prestige
https://scientificguitarist.wixsite.com/home

John Lyons

Re: Pictures!
« Reply #10661 on: October 03, 2009, 12:42:16 AM »
Snake skin outfit even!  ;D
Basic Audio Pedals
www.basicaudio.net/

rousejeremy

Re: Pictures!
« Reply #10662 on: October 03, 2009, 12:54:37 AM »
Awesome. Got any gut shots?

my recently built Clari (not)

Consistency is a worthy adversary

www.jeremyrouse.weebly.com

juse

Re: Pictures!
« Reply #10663 on: October 03, 2009, 03:43:41 AM »
John is too modest - look at some of his other snake works:
















Renegadrian

Re: Pictures!
« Reply #10664 on: October 03, 2009, 06:49:47 AM »
I think I already posted this one...My modest contribution to snakeskin...
It's decoupage paper (I don't know if you call it decoupage as well...but I guess you know what it is) glued to the encl.
It houses a Si Fuzz Face

Done an' workin'=Too many to mention - Tube addict!

John Lyons

Re: Pictures!
« Reply #10665 on: October 03, 2009, 10:30:20 AM »
I like the colors in that one Adriano.
Basic Audio Pedals
www.basicaudio.net/

arma61

Re: Pictures!
« Reply #10666 on: October 03, 2009, 11:09:40 AM »
Hi

ok, cannot compete with John and Adriano, and all the other!! anyway here's my new building a Nurse Quack






and the guts




Cheers m8s

Armando
"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

kristoffereide

Re: Pictures!
« Reply #10667 on: October 03, 2009, 12:29:10 PM »
Awesome. Got any gut shots?

my recently built Clari (not)


No I never got around to it, my brother stole it before I could even try it out! He's a traveling musician so it might be a while before I get the chance to do any gutshots :p
I find it funny how I can have close to 1000 components, yet I never seem to have enough parts to make a project. :icon_eek:

Brymus

  • Awesome!
  • ****
  • Posts: 1600
  • Total likes: 1
  • Bryan G. - Somewhere in the Mohave Desert USA
Re: Pictures!
« Reply #10668 on: October 03, 2009, 04:19:02 PM »
John is too modest - look at some of his other snake works:
















I actually found his page when I started my amp,and was sourcing real snakeskin.
I have it bookmarked  :icon_biggrin:
I didnt realize till now that he is the same person,It was THAT guitar that finally made me greenlight the project and think it
would look sic when its finished.Of course I couldnt afford the real snake ,just like I am using 1$ Rayco enclosures instead of nice
Hammond boxes.
I wish I could get my seams to look as nice as his.
HOW did you seam that on that pedal box?
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

Renegadrian

Re: Pictures!
« Reply #10669 on: October 03, 2009, 04:37:44 PM »
john, my pedals cannot be compared to yours, each one that comes from your hand is a masterpiece...
My snakeskin is, well, so so, I liked the result but I know I can do better...Next one, then!!!  :icon_twisted:
The colors on mine are so shiny as I had several layers of clear and went with fine sanding first (like 200 I believe) and some hand buffing...
Done an' workin'=Too many to mention - Tube addict!

Magnus

Re: Pictures!
« Reply #10670 on: October 04, 2009, 08:01:15 AM »
Hello together,

Quote
@Magnus: That fuzzface is just amazing work both inside and out, really neat!
Thank you  :)

Birdseye-maple: WOW!!!

The snakeskin-pedals and the guitar - very porn, great unique work!

Here is the next one, a Sola Sound Tone Bender MKII-Clone
I built on an own pcb-layout with Cornell Dubilier-Caps and a set of three matched AC122.
The transistors you see trough the holes on the frontpanel are lighten by blue led's:
You can switch the light off with the little switch on the side (longer lasting battery, red led is a low-current-type)...





The pcb with transistor-mounting-plate (diy too):




The lighting-section (brightness can be changed with the mini-trimpot):




The transistor-sockets:




And at last the guts:





Greetings
Magnus
« Last Edit: October 04, 2009, 08:07:01 AM by Magnus »
AMZ Booster, Dist. +, DOD 250,
Dr. Boogey, Fuzz Face's, JCM800-Emu, LPB1,
May Booster, Obsidian, Orange T/B-Booster,
Pentaboost, Prof. Tweed, Rangemaster's,
SansAmp GT2, Superfly (Amp), Guv'nor,
Tone Bender MKI/MKII/MKIII, TS 808

rousejeremy

Re: Pictures!
« Reply #10671 on: October 04, 2009, 12:00:21 PM »
Damn Magnus. You got some building chops.
Consistency is a worthy adversary

www.jeremyrouse.weebly.com

frequencycentral

  • Awesome!
  • ****
  • Posts: 4964
  • Total likes: 131
  • Virtue signalling keyboard warrior since 2020.
    • frequencycentral
Re: Pictures!
« Reply #10672 on: October 04, 2009, 02:02:19 PM »

http://www.frequencycentral.co.uk/

Questo č il fiore del partigiano morto per la libertą!

Brymus

  • Awesome!
  • ****
  • Posts: 1600
  • Total likes: 1
  • Bryan G. - Somewhere in the Mohave Desert USA
Re: Pictures!
« Reply #10673 on: October 04, 2009, 02:20:19 PM »
amps too... :icon_question:
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

Brymus

  • Awesome!
  • ****
  • Posts: 1600
  • Total likes: 1
  • Bryan G. - Somewhere in the Mohave Desert USA
Re: Pictures!
« Reply #10674 on: October 04, 2009, 02:23:51 PM »
Here is a TS type clone with a big muff tone stack(with bypass swicth)
and a bass boost.
Ricks' not the only one who likes using drawer pulls for nerf bars.

« Last Edit: October 04, 2009, 02:25:38 PM by Brymus »
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

Brymus

  • Awesome!
  • ****
  • Posts: 1600
  • Total likes: 1
  • Bryan G. - Somewhere in the Mohave Desert USA
Re: Pictures!
« Reply #10675 on: October 04, 2009, 02:27:05 PM »
The pedal chain to date...
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

darron

Re: Pictures!
« Reply #10676 on: October 05, 2009, 02:24:38 AM »
a couple of gut shots. sorry they were taken off my phone though...

tremolo. all of the LFO is on the right and the audio actives on the left so it's dead quiet. the foot switch turns the entire LFO off if anyone is wondering what's going on there.




another germanium boost pedal, but with a three way frequency switch. i used teflon and tried to keep it simple (which the circuit is) but it still looks like an explosion at the spaghetti factory!!
Blood, Sweat & Flux. Pedals made with lasers and real wires!

Fender3D

Re: Pictures!
« Reply #10677 on: October 05, 2009, 05:37:04 PM »
I can't have my pedals engraved by G. Dorč...  :icon_cry:
but I can print one of his engravings on them  :icon_razz:

Minosser (MXR Flanger)

guts


Dream 90 (MXR Phase 90)

guts


PS:
FXR stands for effects replica
"NOT FLAMMABLE" is not a challenge

5AKERS

Re: Pictures!
« Reply #10678 on: October 05, 2009, 10:37:56 PM »
My "Jawari" build, I call it the "swamy".  It really doesnt sound that great I was expecting something a little better.  Oh well I can always recycle it into something else

darron

Re: Pictures!
« Reply #10679 on: October 05, 2009, 10:40:05 PM »
My "Jawari" build, I call it the "swamy".  It really doesnt sound that great I was expecting something a little better.  Oh well I can always recycle it into something else

that's gold! :D
Blood, Sweat & Flux. Pedals made with lasers and real wires!