MXR Flanger Clone - Help Needed With PCB

[Bainzy]

I'm building a clone of this pedal with the SAD1024A, and I'm replacing the power transformer with a 9V input, stepped up to 17v (with MAX1044) and then regulated down to 15v.

I've got the schematic (this one - http://experimentalistsanonymous.com/diy/Schematics/Flangers/MXR%20Flanger.gif), and know how to wire the switch and the voltage. The problem is I need help on constructing a decent PCB layout from the schematic - can anyone help me on this?

[mrsage]

There are companies you can hire to do that kind of thing...

Otherwise you may have to just dig in and do it yourself. It's a lot of work, and you may have a tough time finding someone willing to put that kind of effort into it...especially with a effect like the MXR flanger, which I'm sure is fairly complex.

I just spent about 6 hours yesterday laying out my first PCB, and it was pretty interesting to do. Much more fulfilling than copying someone else's or ordering a pre-made one from Tonepad or GGG.