Author Topic: Pedal Board Power Supply  (Read 1318 times)

jimmy54

Pedal Board Power Supply
« on: February 19, 2006, 05:38:55 PM »
Hi fellas,

I'm planning on building a power supply for a pedal board and came across this vero layout from somewhere (can't find the original link).

http://photobucket.com/albums/e310/billymill54/?action=view&current=PSU.gif

For this circuit do you just use a standard 12vac wall power supply (and does this need to be hardwired or could you connect the 12vac wall power supply via it's 2.1mm jack into a 2.1mm socket on the multi-power supply enclosure)?

Cheers

no one ever

Re: Pedal Board Power Supply
« Reply #1 on: February 19, 2006, 06:04:48 PM »

For this circuit do you just use a standard 12vac wall power supply (and does this need to be hardwired or could you connect the 12vac wall power supply via it's 2.1mm jack into a 2.1mm socket on the multi-power supply enclosure)?

Cheers

as long as the socket is isolated from the chassis, yep.
(chk chk chk)

bancika

Re: Pedal Board Power Supply
« Reply #2 on: February 19, 2006, 06:39:46 PM »
I'm making similar thing too for both 9V and 12V
http://storm-software.co.yu/diy/index.php?project=stuff
The new version of DIY Layout Creator is out, check it out here