Author Topic: 80's DOD Phasor / 401 (Auburn Box) problem!  (Read 1241 times)

jedhiggs

80's DOD Phasor / 401 (Auburn Box) problem!
« on: April 26, 2006, 04:44:03 PM »
Hey guys, my friend has what appears to be an original 80's (sticker inside says #43  3/11/81) DOD phasor 401 and it's just not working.  Before I start to dig around in it I wanted to see if there was a common problem with these that anyone knew about.  I searched on here and nothing was really on the 401.  Thanks

Ed G.

Re: 80's DOD Phasor / 401 (Auburn Box) problem!
« Reply #1 on: April 26, 2006, 07:29:03 PM »
The phasor is the same circuit as the MXR Phase 45, with different component values. That might help you get started, there's a lot of topics on this forum about the phase 45.
Good luck!