Author Topic: Is this LED ok?  (Read 3288 times)

cat

Is this LED ok?
« on: July 02, 2006, 07:58:41 PM »
Will this LED do the job?

LED 5mm Blue/Green 7000mcd

Emmitted colour: blue/green
Lens colour: waterclear
Wave length: 505
nm: 20
Pd W: 120nW
If mA: 30
If mA (peak): 100
Min: 3.2
Vf (V) Typ: 3.5
Max: 4.0
IV Min: 4900
MCD Typ: 7000
Viewing Angle: 15


GibsonGM

  • more
  • Awesome!
  • *****
  • Posts: 5755
  • Total likes: 893
  • Mike Parker (aka. Guitar Mike, Parks, etc)
Re: Is this LED ok?
« Reply #1 on: July 02, 2006, 09:10:28 PM »
Will it do the job for what, Cat? That looks to me like an ordinary LED...I'd put it in series with a 220 ohm resistor to run it at 9V (180 ideal, 220 is close enough); (supply voltage - LED voltage/LED current from the data sheet).   Unless what you're building requires a certain LED, that should do just fine as an indicator. 
MXR Dist +, TS9/808, Easyvibe, Big Muff Pi, Blues Breaker, Guv'nor.  MOSFace, MOS Boost,  BJT boosts - LPB-2, buffers, Phuncgnosis, FF, Orange Sunshine & others, Bazz Fuss, Tonemender, Little Gem, Orange Squeezer, Ruby Tuby, filters, octaves, trems...

hari

Re: Is this LED ok?
« Reply #2 on: July 24, 2006, 01:19:32 AM »
just to make me sure about this topic, I ask a question once again :icon_biggrin:
Can we use any color other than red led as an indicator? For example in the millenium by pass? I will buy blue or green led for millenium bypass.

thanks

peace...

jonathan perez

Re: Is this LED ok?
« Reply #3 on: July 24, 2006, 01:22:26 AM »
yeah...use em all. ;D
no longer the battle of midway...(i left that band)...

i hate signatures with gear lists/crap for sale....

i am a wah pervert...ask away...

cornelvis

Re: Is this LED ok?
« Reply #4 on: July 24, 2006, 07:33:27 PM »
it isn't color what matters, it's the value that counts....

how di I saythat?

lol

greetzzz,

CornElvis