AMZ FX ANALOG ALCHEMY GEOFX MEF ROG DIY WIKI

Question for T. Lune builders

Started by JonFrum, February 08, 2007, 04:52:54 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JonFrum

February 08, 2007, 04:52:54 PM
I'm planning a TL build based on Torchy's vero layout. What LDR would be best from Small Bear? He shows a two pin LDR opposite a 3mm LED.

markm

#1
February 08, 2007, 07:10:17 PM
I used a VTL5C2 in mine.
Smallbear has 'em.  ;)

JonFrum

#2
February 08, 2007, 07:32:30 PM
Mark

Thanks

MartyMart

#3
February 08, 2007, 08:25:22 PM
Yup, Torchy sent me something similar to that, should work a treat

MM.
"Success is the ability to go from one failure to another with no loss of enthusiasm"
My Website www.martinlister.com

JonFrum

#4
February 08, 2007, 09:36:55 PM
I just noticed that the Torchy parts list has a trimpot labeled 10K-100K. What's going on there?

petemoore

#5
February 09, 2007, 02:27:05 AM
  NSL 32
Convention creates following, following creates convention.
Print
Go Up Pages1
User actions