Author Topic: Smallbear Matched PNP Fuzz Face Transistor Questions  (Read 2101 times)

Easywider

Smallbear Matched PNP Fuzz Face Transistor Questions
« on: July 09, 2007, 09:53:33 PM »
Just making sure , The PNP Positive ground GGG resistor layout starts with R2 thru R5 , & Steves values start at R3 . Do I just change Steves R2 to an R3 & go from there ?.... , ( R3 being R6 on the layout ) : http://www.generalguitargadgets.com/index.php?option=com_content&task=view&id=101&Itemid=26#dallas , is this correct ?

Thanks ,

Chris

smallbearelec

Re: Smallbear Matched PNP Fuzz Face Transistor Questions
« Reply #1 on: July 09, 2007, 10:58:32 PM »
Chris--

Compare the GGG schematic with the left-hand side of the Bear Face schem:

http://www.smallbearelec.com/Projects/BearFace/BearFace.htm

and all should be clear.

SD