Author Topic: .33 uf subed for a .22uf  (Read 3879 times)

JasonG

.33 uf subed for a .22uf
« on: June 12, 2007, 05:17:44 PM »
It should work right? Maby add a bit more low end but that it right?
Class A booster , Dod 250 , Jfet booster, Optical Tremolo, Little Gem 2,  mosfet boost, Super fuzz , ESP stand alone spring reverb red Llama omni-drive , splitter blender ,

NEVER use gorilla glue for guitar repairs! It's Titebond , Elmers, or Superglue

jonathan perez

Re: .33 uf subed for a .22uf
« Reply #1 on: June 12, 2007, 05:18:49 PM »
depends, what circuit are we talking about?
no longer the battle of midway...(i left that band)...

i hate signatures with gear lists/crap for sale....

i am a wah pervert...ask away...

JasonG

Re: .33 uf subed for a .22uf
« Reply #2 on: June 13, 2007, 01:06:07 AM »
I thought this forum was just for the NPN boost by Gus Smally. I have built it a few times on the bread board. I have only one parts substituion in question. My problem is it cuts the high end off and only boosts a little when I move the 5k pot quickly to the max setting. I have tested the trasister its good. My voltages are Base 2 Emitter 2 Collecter 8.
Class A booster , Dod 250 , Jfet booster, Optical Tremolo, Little Gem 2,  mosfet boost, Super fuzz , ESP stand alone spring reverb red Llama omni-drive , splitter blender ,

NEVER use gorilla glue for guitar repairs! It's Titebond , Elmers, or Superglue

aron

Re: .33 uf subed for a .22uf
« Reply #3 on: June 13, 2007, 01:08:18 AM »
What .22uF?

There's a 22uF capacitor.

JasonG

Re: .33 uf subed for a .22uf
« Reply #4 on: June 13, 2007, 09:22:11 AM »
Thats what I ment to put down I dont know why I put .22.
Class A booster , Dod 250 , Jfet booster, Optical Tremolo, Little Gem 2,  mosfet boost, Super fuzz , ESP stand alone spring reverb red Llama omni-drive , splitter blender ,

NEVER use gorilla glue for guitar repairs! It's Titebond , Elmers, or Superglue

aron

Re: .33 uf subed for a .22uf
« Reply #5 on: June 13, 2007, 04:05:04 PM »
OK, well there's still a wiring or soldering problem. The voltages are not correct. Triple-check your work and post pics of front and back if possible.