Author Topic: Show me your 1590A enclosures/pedals... (Read 1340121 times)

Groovenut · « **Reply #1900 on:** March 27, 2015, 08:49:26 PM »

Here's one I finished today. I started with a Rat and kept changing things until I had something I liked, was very versatile and well no longer sounded like a Rat.

I'll try to get a demo up. This ones a keeper

deadastronaut · « **Reply #1901 on:** March 28, 2015, 09:04:49 AM »

cool..

if those jacks ever move you'll have 'true true bypass' too..

Groovenut · « **Reply #1902 on:** March 28, 2015, 10:30:09 AM »

Quote from: deadastronaut on March 28, 2015, 09:04:49 AM

cool..

if those jacks ever move you'll have 'true true bypass' too..

Thanks Rob!

Yup

They are the first thing I put in the enclosure and I really wrench 'em tight. Plus I have a notching process that puts little teeth on the shoulder to bite like a spider washer. So far no issues. It would be nice to have a more compact option that was the quality of the Switchcraft jacks though. A size that would allow spider washers would be my preference, but I have yet to find this solution.

italianguy63 · « **Reply #1903 on:** March 28, 2015, 10:35:14 AM »

Law-- the pedal "names" are confusing me...

Are they Japanese, or pig Latin, or is the Acronym Dog in my head just howling!

$:-\$

Stellar builds..

MC

Groovenut · « **Reply #1904 on:** March 28, 2015, 11:35:33 AM »

Quote from: italianguy63 on March 28, 2015, 10:35:14 AM

Law-- the pedal "names" are confusing me...

Are they Japanese, or pig Latin, or is the Acronym Dog in my head just howling!

$:-\$

Stellar builds..

MC

Thanks Mark!

They are Japanese. Though your Acronym Dog might be on to something

I hope all is well!

Law

italianguy63 · « **Reply #1905 on:** March 28, 2015, 11:47:14 AM »

I work for government. Everything I see screams acronym first.

So, do you have a large secret Japanese market, Law?

All is well, other than my neck looks like somebody took a blow torch to it.. BLACK.

Healing now.

MC

lars-musik · « **Reply #1906 on:** March 28, 2015, 02:49:55 PM »

I'll cross-post this nifty little device because I really like it!
All infos here.

nocentelli · « **Reply #1907 on:** March 28, 2015, 02:57:33 PM »

Quote from: Groovenut on March 25, 2015, 12:42:26 PM

This one was a little easier to get in the box One chip fuzz. Unlike most of my other circuits, this is a one trick pony. Over the top fuzz and sustain. Great for lead lines

Ooh, nice. What is it? Some sort of "fuzz chip" tonebender or cascaded boosters stages?

Groovenut · « **Reply #1908 on:** March 28, 2015, 04:36:57 PM »

Quote from: nocentelli on March 28, 2015, 02:57:33 PM

Quote from: Groovenut on March 25, 2015, 12:42:26 PM
This one was a little easier to get in the box One chip fuzz. Unlike most of my other circuits, this is a one trick pony. Over the top fuzz and sustain. Great for lead lines

Ooh, nice. What is it? Some sort of "fuzz chip" tonebender or cascaded boosters stages?

Yes it is a "fuzz chip" tonebender, though not the proprietary chip kind

Just a run of the mill NOS 3046

Groovenut · « **Reply #1909 on:** March 28, 2015, 08:35:23 PM »

Quote from: italianguy63 on March 28, 2015, 11:47:14 AM

So, do you have a large secret Japanese market, Law?

All the Yakuza guitar shredders use LPD pedals

italianguy63 · « **Reply #1910 on:** March 28, 2015, 11:22:40 PM »

Quote from: Groovenut on March 28, 2015, 08:35:23 PM

Quote from: italianguy63 on March 28, 2015, 11:47:14 AM
So, do you have a large secret Japanese market, Law?
All the Yakuza guitar shredders use LPD pedals

That's awesome! I have the Black Hand folks covered.

MC

Caboverde · « **Reply #1911 on:** March 28, 2015, 11:34:46 PM »

Quote from: lars-musik on March 28, 2015, 02:49:55 PM

I'll cross-post this nifty little device because I really like it!
All infos here.

Very nice! What did you use to etch that?

lars-musik · « **Reply #1912 on:** March 29, 2015, 09:31:59 AM »

I used old FeCl3 in 40g/l concentration and toner transfer as etching mask.

Saint Louis Toneworks · « **Reply #1913 on:** March 29, 2015, 09:45:51 AM »

all I can is wow. you gusy are truly artist and good at what you do. inspiration for me to keep going and the standard i want to become.

nice looking stuff , all of it

Groovenut · « **Reply #1914 on:** March 29, 2015, 11:53:18 AM »

Quote from: lars-musik on March 29, 2015, 09:31:59 AM

I used old FeCl3 in 40g/l concentration and toner transfer as etching mask.

That's what I use for mine as well. I have a bottle of old Radio Shack pcb etchant that does a nice job on aluminum. The hardest part is getting the toner transfer to adhere fully so the lines are nice and sharp after etch.

Groovenut · « **Reply #1915 on:** March 30, 2015, 02:26:41 AM »

Here's one I finished today. Drawing inspiration from the Maxon OD820 circuit and my Solaris builds. Really great sounding versatile overdrive with lots of boost level.

Cozybuilder · « **Reply #1916 on:** March 30, 2015, 03:21:56 AM »

Groovenut- Your builds look incredible. Thanks for sharing.

thomasha · « **Reply #1917 on:** April 01, 2015, 08:47:11 PM »

Hi,
finally build a klon!

and a small wah-wah, colorsound inductorless, as another member already did...

Cheers,
Thomas

Kipper4 · « **Reply #1918 on:** April 01, 2015, 09:18:22 PM »

Super fine engineering guys.
Love the little wah wah.

vigilante397 · « **Reply #1919 on:** April 01, 2015, 11:48:13 PM »

Quote from: thomasha on April 01, 2015, 08:47:11 PM

THIS LOOKS AMAZING. LIKE WOW. I'M SORRY I CAN'T EVEN STOP SHOUTING. THIS IS SO GOOD.

News:

Author Topic: Show me your 1590A enclosures/pedals... (Read 1340121 times)