« previous next »
Pages: [1]   Go Down

Author Topic: fitting footswitch to 250 clone  (Read 6745 times)

axevictim

fitting footswitch to 250 clone
« on: April 09, 2008, 02:48:55 AM »
hi guys im pretty new to the  pedal building scene,ive breadboarded a couple of projects  so decided to have a go at building the 250 clone on vero board and im pleased to say it turned out great,now the only thing im having trouble with is fitting a DPDT switch.Theres a great vero board diagram of the 250 posted by gaussmarkov on this post which i have used but it doesnt show you how to fit a footswitch unfortunately if anyone could help that would be great thanks.
Logged

gaussmarkov

Re: fitting footswitch to 250 clone
« Reply #1 on: April 09, 2008, 01:23:06 PM »
i wonder if the information you need is in the tonepad.com document about off-board wiring?  see http://tonepad.com/project.asp?id=35 and follow the links to the pdf document.
Logged

gaussmarkov

Re: fitting footswitch to 250 clone
« Reply #2 on: April 09, 2008, 01:23:52 PM »
... and hey!  welcome to the forum! :icon_biggrin:
Logged

axevictim

Re: fitting footswitch to 250 clone
« Reply #3 on: April 13, 2008, 11:19:44 AM »
got there in the end thanks very much for your help
Logged

gaussmarkov

Re: fitting footswitch to 250 clone
« Reply #4 on: April 13, 2008, 01:45:41 PM »
Quote from: axevictim on April 13, 2008, 11:19:44 AM
got there in the end thanks very much for your help
excellent. :icon_cool:
Logged
Pages: [1]   Go Up
« previous next »