Author Topic: Can we start a Demo Video Thread?  (Read 230267 times)

Lurco

Re: Can we start a Demo Video Thread?
« Reply #120 on: December 19, 2010, 02:54:51 AM »
Is that basically amplitude modulation? Sounds more or less like a ring modulator, but with more of the original signal and carrier getting through.

wouldn't amplitude modulation be a tremolo? no, it's a sample and hold. there are two buffers with a fet switched by a really fast clock in the middle. when it's switched off a small capacitor holds the signal where it was which is held by the buffer. this in effect makes the wave have a ladder and sound like a low bitrate digital signal (atari)

Ok I'm familiar with S/H circuits from synths.  So then the more frequently the sample and hold samples, the greater the number of amplitude levels it is representing, similar to the number of amplitude levels represented by different bit resolutions in digital audio... just that in this case, they are probably not fixed to exact corresponding fixed amplitude depths/voltages, like they would be in digital.

I can see how that would work.

that's right. in fact it seems whenever the circuit is mentioned people jump in to remind that it is not true bit crushing, as you pointed out there's infinite number of amplitude depths and the levels are not fixed. the sound is still right. it's simple and fun but not sure how practical this would be for use without further development removing the noise.

the schematic is here but i had to modify the values to get it working: http://experimentalistsanonymous.com/diy/index.php?dir=Schematics/Fuzz%20and%20Fuzzy%20Noisemakers

more here: http://www.diystompboxes.com/smfforum/index.php?topic=48809.0

gtudoran

Re: Can we start a Demo Video Thread?
« Reply #121 on: December 19, 2010, 04:26:00 PM »
Hey guys,

A Dr.Booge with included cabsim by Analog Sound - a little video from a fiend of mine recorded directly in computer sound card.
http://www.youtube.com/watch?v=TPwEc-Mqeq8&feature=player_embedded

Best regards,
Gabriel Tudoran
Analog Sound

Pigyboy

Re: Can we start a Demo Video Thread?
« Reply #122 on: December 25, 2010, 06:50:37 AM »

Here is another video of Frequency Central's great Little Angel. We made this soundclip into the Boss mobile studio to try to capture the sound better than thru the shitty camera mic.
http://www.youtube.com/watch?v=vQZ4HGOsxzA
And you'll have to admit, I'll be rich as shit
I'll just sit and grin, the money will roll right in....
                                                            - FANG

Pigyboy

Re: Can we start a Demo Video Thread?
« Reply #123 on: December 26, 2010, 12:26:31 PM »

White '74 Overdrive
Here are two video links. One is a short clip of the Little Angel after the Overdrive
http://www.youtube.com/watch?v=aFsFRAFUd7k
http://www.youtube.com/watch?v=xHcLGeg53-A
And you'll have to admit, I'll be rich as shit
I'll just sit and grin, the money will roll right in....
                                                            - FANG

jkokura

Re: Can we start a Demo Video Thread?
« Reply #124 on: December 29, 2010, 05:56:36 PM »

joegagan

Re: Can we start a Demo Video Thread?
« Reply #125 on: January 08, 2011, 01:40:32 AM »
my life is a tribute to the the great men and women who held this country together when the world was in trouble. my debt cannot be repaid, but i will do my best.

gtudoran

Re: Can we start a Demo Video Thread?
« Reply #126 on: January 10, 2011, 04:24:58 AM »
My little PiaB (Plexi In a Box) with cabinet simulation and direct output. Video recorded by a friend of mine, all details in video.
http://www.youtube.com/watch?v=G81xhCGBZbo

Best regards,
Gabriel Tudoran
Analog Sound

chromesphere

Re: Can we start a Demo Video Thread?
« Reply #127 on: January 16, 2011, 09:29:46 PM »
Hi all,

I posted this in the tri-vibe thread on the main page, didnt realise there was this Demo Video Thread!

Tri-vibe: http://www.youtube.com/watch?v=X9NYFJ4oHWc

Also, something else i put together using my DC timeline and 3 DIY pedals:

Multi-FX: http://www.youtube.com/watch?v=FXIJ271nRWw&feature=related

Paul
.                   
Pedal Parts Shop                Youtube

Slade

Re: Can we start a Demo Video Thread?
« Reply #128 on: January 18, 2011, 08:44:29 AM »
Hi,
Here I have another video for the Classic Germanium Fuzz I made a month or so ago.
This time going into a Mesa Boogie Studio Caliber DC2:

http://www.youtube.com/watch?v=9EyfRJX_ZL4

Cheers,
Fernando.-


chromesphere

Re: Can we start a Demo Video Thread?
« Reply #130 on: January 19, 2011, 07:01:22 PM »
Here's another one, just recorded it yesterday.  I hope the amount of talking isnt a turn off, had a few things to say about the pedal  :icon_eek:

MXR Distortion Plus
http://www.youtube.com/watch?v=maSkDb5pP24

Paul
.                   
Pedal Parts Shop                Youtube

shiner_man

Re: Can we start a Demo Video Thread?
« Reply #131 on: January 20, 2011, 10:11:04 PM »
Here's a couple of the SHO clone I did.  The first video is a lead sound with the SHO going into a modified TS9 into a Boss DD-3. 

http://www.youtube.com/watch?v=tirZ44Arezk

This one is just a straight comparison of the pedal off then on.  The video doesn't do it justice.  It gets A LOT of boost even on the lowest
setting.

http://www.youtube.com/watch?v=h6vTOr7KjyM&feature=related

deadastronaut

Re: Can we start a Demo Video Thread?
« Reply #132 on: January 21, 2011, 04:39:53 AM »
Here's a couple of the SHO clone I did.  The first video is a lead sound with the SHO going into a modified TS9 into a Boss DD-3. 

http://www.youtube.com/watch?v=tirZ44Arezk

This one is just a straight comparison of the pedal off then on.  The video doesn't do it justice.  It gets A LOT of boost even on the lowest
setting.

http://www.youtube.com/watch?v=h6vTOr7KjyM&feature=related

nice sound...nice playing...very chilled.... :icon_cool:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

shiner_man

Re: Can we start a Demo Video Thread?
« Reply #133 on: January 21, 2011, 09:14:37 AM »
Here's a couple of the SHO clone I did.  The first video is a lead sound with the SHO going into a modified TS9 into a Boss DD-3. 

http://www.youtube.com/watch?v=tirZ44Arezk

This one is just a straight comparison of the pedal off then on.  The video doesn't do it justice.  It gets A LOT of boost even on the lowest
setting.

http://www.youtube.com/watch?v=h6vTOr7KjyM&feature=related

nice sound...nice playing...very chilled.... :icon_cool:

Thanks man. 

ca cat

Re: Can we start a Demo Video Thread?
« Reply #134 on: February 16, 2011, 07:59:25 AM »
A demo of two pedals I've built, played by my friend with magic fingers  :D

JaM Drive - mu-amp/bsiab - ish pedal, with charge pum and diferent transistors.

http://www.youtube.com/embed/7NGg5Kg5EBI

And a zen drive clone:

http://www.youtube.com/embed/S2rmMf_gl9o


Greetings from Slovenia :)
Jamin' with JaM IT FX - www.jamitfx.com

deadastronaut

Re: Can we start a Demo Video Thread?
« Reply #135 on: February 16, 2011, 08:04:33 AM »
nice jam drive...cool... 8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

rousejeremy

Re: Can we start a Demo Video Thread?
« Reply #136 on: February 18, 2011, 01:10:17 PM »
Here's a video of a GGG Boutique 70 fuzz I built last summer.
http://www.youtube.com/watch?v=oheUZ0_5p8E
Consistency is a worthy adversary

www.jeremyrouse.weebly.com

deadastronaut

Re: Can we start a Demo Video Thread?
« Reply #137 on: February 18, 2011, 01:18:23 PM »
wow...nice tone man..nice licks too.. :icon_cool:

figured i best put this on this thread too.. :icon_wink:

http://www.youtube.com/user/100roberthenry?feature=mhum#p/u/0/UwvCvSwbXYI
« Last Edit: February 18, 2011, 01:20:14 PM by deadastronaut »
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

rousejeremy

Re: Can we start a Demo Video Thread?
« Reply #138 on: February 18, 2011, 01:28:42 PM »
Thanks. I'm going to try to lower the voltage on the collector of Q2 sometime. I remember running it a little hotter than usual when I built it, it sounded nice on a quiet amp but the louder I play the looser it gets.
Consistency is a worthy adversary

www.jeremyrouse.weebly.com

Pigyboy

Re: Can we start a Demo Video Thread?
« Reply #139 on: March 09, 2011, 07:04:13 PM »

Wee Beaver Fuzz video by Kayzer
http://www.youtube.com/watch?v=C_1RA8jd3jo
Thanks Frequency Central & Slade Ruz
And you'll have to admit, I'll be rich as shit
I'll just sit and grin, the money will roll right in....
                                                            - FANG