Author Topic: 666 Competition  (Read 72756 times)

trad3mark

Re: 666 Competition
« Reply #60 on: June 20, 2010, 12:25:44 PM »
INSPIRING PICTURE DAY!


steal my idea, and i shall unleash a mighty evil on you....

Slade

Re: 666 Competition
« Reply #61 on: June 28, 2010, 06:26:53 PM »
4th page?!
Anyone else will participate?

22 pages left...

Brymus

  • Poster2
  • **
  • Posts: 1600
  • Total likes: 1
  • Bryan G. - Somewhere in the Mohave Desert USA
Re: 666 Competition
« Reply #62 on: June 28, 2010, 06:58:33 PM »
if we happen to get it finished before submission date, can we post our efforts here? not that i'm anywhere near finished, but it looks like i'll be 99% done by the weekend or early next week.

I think it would be more exciting to hold off until page 666 comes around. Don't let the cat out of the bag too early.

and what happens if it goes to 667?...hmmmm....rules...rules...rules....... :icon_eek:

  • You must post your finished pedal on the Pictures! thread on page 666 or any of the following pages providing it is posted on the same day that the Pictures! thread reaches page 666
  • Your finished pedal must also be posted on this thread on the same day
So its fairly simple.
You have 24 hrs after the pictures thread hits page 666 to post your builds there (irregardless what page it hits before that day is over) and in this thread,two posts in two threads per entry.
(I hope I said that right)
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

Slade

Re: 666 Competition
« Reply #63 on: June 28, 2010, 08:14:28 PM »
Perfect.

frequencycentral

  • Poster2
  • **
  • Posts: 4955
  • Total likes: 119
  • Virtue signalling keyboard warrior since 2020.
    • frequencycentral
Re: 666 Competition
« Reply #64 on: July 14, 2010, 02:00:33 PM »
As of today, an 'unlucky' 13 pages to go!
http://www.frequencycentral.co.uk/

Questo Ŕ il fiore del partigiano morto per la libertÓ!

Joe Hart

Re: 666 Competition
« Reply #65 on: July 14, 2010, 02:31:52 PM »

Anyone else will participate?


I will participate!
-Joe Hart

Galego

Re: 666 Competition
« Reply #66 on: July 16, 2010, 02:53:05 PM »
I'm waiting... Patiently.

frequencycentral

  • Poster2
  • **
  • Posts: 4955
  • Total likes: 119
  • Virtue signalling keyboard warrior since 2020.
    • frequencycentral
Re: 666 Competition
« Reply #67 on: July 16, 2010, 03:02:32 PM »
Well, I'm going on holiday (vacation to our colonial brothers) exactly a month from today for ten days, I'll be incommunicado for the duration, so I'm hoping we reach page 666 before then, otherwise the suspense will kill me.
http://www.frequencycentral.co.uk/

Questo Ŕ il fiore del partigiano morto per la libertÓ!

trad3mark

Re: 666 Competition
« Reply #68 on: July 16, 2010, 03:05:31 PM »
I'm waiting... Patiently.

AND I'M WAAAAAAAIIIIIIIIIIIITTIIIIIINNNNNGGGGGG!!!!! PAAAAAAAAAAATTTIIEEEEEEENNNNNNTTLLL!!!!! <3 muse! :D

wait...

amidoinitrite?

in any case, just finished debugging. box is 90% done. OMFG! excitement!

amptramp

Re: 666 Competition
« Reply #69 on: July 16, 2010, 05:51:00 PM »
I'm waiting... Patiently.

Patience is a virtue.  Why do the virtuous want to get to page 666?  Oh, and good timing - your reply was number 66 on the 666 thread.

Galego

Re: 666 Competition
« Reply #70 on: July 16, 2010, 06:09:05 PM »
Patience is a virtue.  Why do the virtuous want to get to page 666?  Oh, and good timing - your reply was number 66 on the 666 thread.

Ha! I hadn't noticed that!  :D

trad3mark

Re: 666 Competition
« Reply #71 on: July 16, 2010, 08:09:10 PM »
DISASTER! made a balls of the project i was doing for it. Time to start again, and that last board took me ages. Going to be a few late nights.
/sadface

trad3mark

Re: 666 Competition
« Reply #72 on: July 23, 2010, 02:25:28 PM »
Quick question. I've a few jumpers on the underside of my board for this. For the whole manditory gut shot thing, does the underside have to be shown? I really dont want to have to take out all the screws......

frequencycentral

  • Poster2
  • **
  • Posts: 4955
  • Total likes: 119
  • Virtue signalling keyboard warrior since 2020.
    • frequencycentral
Re: 666 Competition
« Reply #73 on: July 23, 2010, 07:56:45 PM »
Quick question. I've a few jumpers on the underside of my board for this. For the whole manditory gut shot thing, does the underside have to be shown? I really dont want to have to take out all the screws......

That'll be fine. It's getting close isn't it?
http://www.frequencycentral.co.uk/

Questo Ŕ il fiore del partigiano morto per la libertÓ!

trad3mark

Re: 666 Competition
« Reply #74 on: July 23, 2010, 08:40:33 PM »
is it nearly time to spam the thread to bits, just so we can get on with it? hahahahaha! jk.

frequencycentral

  • Poster2
  • **
  • Posts: 4955
  • Total likes: 119
  • Virtue signalling keyboard warrior since 2020.
    • frequencycentral
Re: 666 Competition
« Reply #75 on: July 23, 2010, 08:51:19 PM »
NO! I'm just waiting for the prize's enclosure to arrive from Chile - hope to have it finished in time! Hint hint Slade!
http://www.frequencycentral.co.uk/

Questo Ŕ il fiore del partigiano morto per la libertÓ!

Slade

Re: 666 Competition
« Reply #76 on: July 24, 2010, 01:55:59 PM »
Patience, guys... working on it. Never made a "prize" enclosure before, it has to be imperfect :icon_twisted:

666 = (6+6+6) + (6*6*6) + (6*6*6) + (6*6*6)

deadastronaut

Re: 666 Competition
« Reply #77 on: July 24, 2010, 01:57:34 PM »
its bound to look terrible.... :icon_mrgreen: :icon_mrgreen: :icon_mrgreen: :icon_mrgreen: :icon_mrgreen: :icon_mrgreen:
http://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Brymus

  • Poster2
  • **
  • Posts: 1600
  • Total likes: 1
  • Bryan G. - Somewhere in the Mohave Desert USA
Re: 666 Competition
« Reply #78 on: July 24, 2010, 06:27:49 PM »
I am gonna particapate ,dont expect to win,but what the hay.
My entry will be my first non-Rayco enclosure,and my first to use graphics/labeling of any kind.
So given its based on the builders past builds I might have a small chance.  ::)

Seeing as all my "original" ideas have already been done and displayed in the picture thread,well dont expect greatness from me.
I have decided to just follow through with my intents,and revel in the greatness of others.
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

Quackzed

Re: 666 Competition
« Reply #79 on: July 25, 2010, 12:38:50 AM »
Quote
666 = (6+6+6) + (6*6*6) + (6*6*6) + (6*6*6)
Verified!
nothing says forever like a solid block of liquid nails!!!