Author Topic: Etched enclosures (Read 881570 times)

deadastronaut · « **Reply #2360 on:** April 17, 2018, 06:30:44 AM »

yeah man, love it.....

bluebunny · « **Reply #2361 on:** April 17, 2018, 08:15:31 AM »

Quote from: Hexjibber on April 17, 2018, 06:08:59 AM

I've been out of the game for a bit of a while

Now that's what I call a return!

Hexjibber · « **Reply #2362 on:** April 17, 2018, 09:07:06 AM »

Cheers dudes!

Marcos - Munky · « **Reply #2363 on:** April 17, 2018, 11:49:34 AM »

Hexjibber, just one word: awesome!

vigilante397 · « **Reply #2364 on:** April 18, 2018, 09:11:42 AM »

Quote from: Hexjibber on April 17, 2018, 06:08:59 AM

Hot damn I missed you. Welcome back

Marcos - Munky · « **Reply #2365 on:** April 19, 2018, 05:20:36 PM »

5th build of 2018. It's a Big Muff I made for a friend. He drew the artwork, I did a reverse etch on all sides of the enclosure (my first etch on a side of a enclosure), plus a little bit of "relic" finishing (actually the etches went too shallow and I got some of the ink removed when I was sanding the enclosure, but my friend liked the result, so I left it this way).

Marcos - Munky · « **Reply #2366 on:** April 21, 2018, 02:02:25 PM »

6th build of 2018. It's a mosfet booster. Simple, but effective. Artwork drawn by my brother, then I etched it.

Pettol · « **Reply #2367 on:** April 26, 2018, 09:57:37 AM »

Quote from: Hexjibber on April 17, 2018, 06:08:59 AM

Amazing!

KarenColumbo · « **Reply #2368 on:** May 01, 2018, 02:00:24 PM »

Will be a Centaur clone.

stallik · « **Reply #2369 on:** May 01, 2018, 02:10:48 PM »

Very nice Andreas and well photographed. It's easy to see the depth of the etch. No labels?

KarenColumbo · « **Reply #2370 on:** May 02, 2018, 05:46:24 AM »

Quote from: stallik on May 01, 2018, 02:10:48 PM

Very nice Andreas and well photographed. It's easy to see the depth of the etch. No labels?

Thx mate. Nah, no labels, customer thinks he got it figured

KarenColumbo · « **Reply #2371 on:** May 02, 2018, 05:48:25 AM »

Here's another one. BMP with active Bass, parametric Mids, Treble blend and a LPB-1 in front via 2nd Stompswitch.
Will have two small red LEDs: If Boost is disabled, Hellboy's cigarette is lit, if it's activated, his eye glows red

Marcos - Munky · « **Reply #2372 on:** May 09, 2018, 08:47:23 PM »

7th build of 2018. A friend asked me for a fuzz that's "noisy", so I built him 2 Devi Ever fuzzes in series. I don't remember the exact names, but they're basically built around the Soda Meiser, one with a switch to choose between 2 different transistors and the other one with noise and chaos mods.

Pettol · « **Reply #2373 on:** May 11, 2018, 05:01:11 PM »

Another BMP. I don't know if it qualifies for this thread, but at least the plate and the foot switch cap are etched.

vigilante397 · « **Reply #2374 on:** May 11, 2018, 06:25:30 PM »

Quote from: Pettol on May 11, 2018, 05:01:11 PM

I don't know if it qualifies for this thread

Great looking build

Marcos - Munky · « **Reply #2375 on:** May 12, 2018, 12:06:24 AM »

Clean plate etch. Also, it's the first time I ever sw an etched footswitch!

Marcos - Munky · « **Reply #2376 on:** June 03, 2018, 08:06:02 PM »

8th build of 2018. Doug Hammond's Highway89 using a layout provided by 287m - thanks again, bro!

Btw, this one have 4 16mm pots in a 1590A

patrick398 · « **Reply #2377 on:** June 05, 2018, 03:07:32 PM »

Quote from: Pettol on May 11, 2018, 05:01:11 PM

Another BMP. I don't know if it qualifies for this thread, but at least the plate and the foot switch cap are etched.

That's a beautiful enclosure, where d'ya get it?

Pettol · « **Reply #2378 on:** June 08, 2018, 04:09:16 PM »

Quote from: patrick398 on June 05, 2018, 03:07:32 PM

That's a beautiful enclosure, where d'ya get it?

I made it myself, so thanks!

I actually wrote a little tutorial how to make them:
https://www.dropbox.com/s/01og324tqfbmx7z/DIY%20enclosures%20v1.pdf?dl=0
You can also find it under Files in the DIY stompboxes (unofficial) group on Facebook.

vigilante397 · « **Reply #2379 on:** June 12, 2018, 01:34:11 AM »

I know this isn't technically etched, it's CNC engraved, and I already posted it in the big Pictures thread, I'm just really excited about how it turned out and wanted to post it here as well

News:

Author Topic: Etched enclosures (Read 881570 times)