Author Topic: Etched enclosures  (Read 550219 times)

deadastronaut

Re: Etched enclosures
« Reply #2360 on: April 17, 2018, 06:30:44 AM »
yeah man, love it..... 8) 8) 8)
http://www.youtube.com/user/100roberthenry

https://deadastronaut.wixsite.com/effects

^ SPACE PATROL FUZZ/ NANO-8 MIDI DRUMS /CHASM REVERB / TREMSHIFTER / FAZE FILTER/ABDUCTOR II DELAY pcb's + WAH LIGHT PLATES. and sausa

bluebunny

Re: Etched enclosures
« Reply #2361 on: April 17, 2018, 08:15:31 AM »
I've been out of the game for a bit of a while

Now that's what I call a return!   :D
Ohm's Law - much like Coles Law, but with less cabbage...

Hexjibber

Re: Etched enclosures
« Reply #2362 on: April 17, 2018, 09:07:06 AM »
Cheers dudes! 8)

Marcos - Munky

Re: Etched enclosures
« Reply #2363 on: April 17, 2018, 11:49:34 AM »
Hexjibber, just one word: awesome!

vigilante397

Re: Etched enclosures
« Reply #2364 on: April 18, 2018, 09:11:42 AM »


Hot damn I missed you. Welcome back 8)
"I'm not sure what "serious design flaws" you see. Does it explode or poison your dog?" - PRR

"Tayda's Whipping Boy" "Most Detestable Forum Member 2018"

http://www.sushiboxfx.com

Marcos - Munky

Re: Etched enclosures
« Reply #2365 on: April 19, 2018, 05:20:36 PM »
5th build of 2018. It's a Big Muff I made for a friend. He drew the artwork, I did a reverse etch on all sides of the enclosure (my first etch on a side of a enclosure), plus a little bit of "relic" finishing (actually the etches went too shallow and I got some of the ink removed when I was sanding the enclosure, but my friend liked the result, so I left it this way).


Marcos - Munky

Re: Etched enclosures
« Reply #2366 on: April 21, 2018, 02:02:25 PM »
6th build of 2018. It's a mosfet booster. Simple, but effective. Artwork drawn by my brother, then I etched it.


Pettol

Re: Etched enclosures
« Reply #2367 on: April 26, 2018, 09:57:37 AM »

KarenColumbo

Re: Etched enclosures
« Reply #2368 on: May 01, 2018, 02:00:24 PM »
Will be a Centaur clone.

"In the beginning there was nothing - which exploded" - Terry Pratchett

stallik

Re: Etched enclosures
« Reply #2369 on: May 01, 2018, 02:10:48 PM »
Very nice Andreas and well photographed. It's easy to see the depth of the etch. No labels?
Insanity: doing the same thing over and over again and expecting different results. Albert Einstein

KarenColumbo

Re: Etched enclosures
« Reply #2370 on: May 02, 2018, 05:46:24 AM »
Very nice Andreas and well photographed. It's easy to see the depth of the etch. No labels?
Thx mate. Nah, no labels, customer thinks he got it figured :)
"In the beginning there was nothing - which exploded" - Terry Pratchett

KarenColumbo

Re: Etched enclosures
« Reply #2371 on: May 02, 2018, 05:48:25 AM »
Here's another one. BMP with active Bass, parametric Mids, Treble blend and a LPB-1 in front via 2nd Stompswitch.
Will have two small red LEDs: If Boost is disabled, Hellboy's cigarette is lit, if it's activated, his eye glows red :)


"In the beginning there was nothing - which exploded" - Terry Pratchett

Marcos - Munky

Re: Etched enclosures
« Reply #2372 on: May 09, 2018, 08:47:23 PM »
7th build of 2018. A friend asked me for a fuzz that's "noisy", so I built him 2 Devi Ever fuzzes in series. I don't remember the exact names, but they're basically built around the Soda Meiser, one with a switch to choose between 2 different transistors and the other one with noise and chaos mods.

Pettol

Re: Etched enclosures
« Reply #2373 on: May 11, 2018, 05:01:11 PM »
Another BMP. I don't know if it qualifies for this thread, but at least the plate and the foot switch cap are etched.  :D







vigilante397

Re: Etched enclosures
« Reply #2374 on: May 11, 2018, 06:25:30 PM »
I don't know if it qualifies for this thread



Great looking build 8)
"I'm not sure what "serious design flaws" you see. Does it explode or poison your dog?" - PRR

"Tayda's Whipping Boy" "Most Detestable Forum Member 2018"

http://www.sushiboxfx.com

Marcos - Munky

Re: Etched enclosures
« Reply #2375 on: May 12, 2018, 12:06:24 AM »
Clean plate etch. Also, it's the first time I ever sw an etched footswitch! :icon_cool:

Marcos - Munky

Re: Etched enclosures
« Reply #2376 on: June 03, 2018, 08:06:02 PM »
8th build of 2018. Doug Hammond's Highway89 using a layout provided by 287m - thanks again, bro!


Btw, this one have 4 16mm pots in a 1590A :icon_wink:

patrick398

Re: Etched enclosures
« Reply #2377 on: June 05, 2018, 03:07:32 PM »
Another BMP. I don't know if it qualifies for this thread, but at least the plate and the foot switch cap are etched.  :D







That's a beautiful enclosure, where d'ya get it?
'It's the musician's law. Colonel Gaddafi could not lay down a bass hook, Mark. That should be clear even to you.'

Pettol

Re: Etched enclosures
« Reply #2378 on: June 08, 2018, 04:09:16 PM »
That's a beautiful enclosure, where d'ya get it?

I made it myself, so thanks!  :D

I actually wrote a little tutorial how to make them:
https://www.dropbox.com/s/01og324tqfbmx7z/DIY%20enclosures%20v1.pdf?dl=0
You can also find it under Files in the DIY stompboxes (unofficial) group on Facebook.

vigilante397

Re: Etched enclosures
« Reply #2379 on: June 12, 2018, 01:34:11 AM »
I know this isn't technically etched, it's CNC engraved, and I already posted it in the big Pictures thread, I'm just really excited about how it turned out and wanted to post it here as well :P



"I'm not sure what "serious design flaws" you see. Does it explode or poison your dog?" - PRR

"Tayda's Whipping Boy" "Most Detestable Forum Member 2018"

http://www.sushiboxfx.com