Author Topic: Etched enclosures  (Read 803063 times)

thomasha

Re: Etched enclosures
« Reply #2600 on: October 31, 2020, 08:47:13 AM »
Hi, small etch for a dr. boogei

and the final result>

duck_arse

Re: Etched enclosures
« Reply #2601 on: October 31, 2020, 09:27:56 AM »
you've got more knobs than sense, thomasha.
"I'm your vehicle, baby", but go easy on the clutch.

"You've got a suss sus sus sus sus sus sus suspect device."

deadastronaut

Re: Etched enclosures
« Reply #2602 on: November 15, 2020, 09:30:20 AM »
anyone else not able to get on postimages.org?

 :-\
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

EBK

Re: Etched enclosures
« Reply #2603 on: November 15, 2020, 09:50:36 AM »
  • SUPPORTER
"I want to go back to being weird. I like being weird. Weird's all I've got. That, and my sweet style." --Maurice Moss

deadastronaut

Re: Etched enclosures
« Reply #2604 on: November 15, 2020, 09:54:38 AM »
cheers erik...thought it was just me.  ;)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

EBK

Re: Etched enclosures
« Reply #2605 on: November 15, 2020, 10:12:00 AM »
cheers erik...thought it was just me.  ;)
It's more of a 2020 thing.  :icon_wink:
  • SUPPORTER
"I want to go back to being weird. I like being weird. Weird's all I've got. That, and my sweet style." --Maurice Moss

antonis

Re: Etched enclosures
« Reply #2606 on: November 15, 2020, 01:28:00 PM »
thought it was just me.  ;)

Aren't "just you" enough to cause all those troubles..??  :icon_mrgreen: :icon_lol:
"I'm getting older while being taught all the time" Solon the Athenian..
"I don't mind  being taught all the time but I do mind a lot getting old" Antonis the Thessalonian..

deadastronaut

Re: Etched enclosures
« Reply #2607 on: November 16, 2020, 02:19:55 AM »
Yes....ha ha  :icon_twisted:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

deadastronaut

Re: Etched enclosures
« Reply #2608 on: November 16, 2020, 07:21:36 AM »
my latest creation.....flanger with mix, lfo depth, fast lfo/ lfo off for manual filter/and uber slow lfo, and wide and thin sound.....demo soon.  8)











https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

thomasha

Re: Etched enclosures
« Reply #2609 on: November 16, 2020, 08:41:06 AM »
Nicely done!
For a second I though there were thousands of LEDs on that enclosure based on the last image.

bluebunny

Re: Etched enclosures
« Reply #2610 on: November 16, 2020, 08:50:12 AM »
For a second I though there were thousands of LEDs on that enclosure based on the last image.

Careful what you wish for!   :icon_eek:

Nice job, Rob.  :icon_cool:
  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

deadastronaut

Re: Etched enclosures
« Reply #2611 on: November 16, 2020, 09:28:07 AM »

For a second I though there were thousands of LEDs on that enclosure based on the last image.

oooh....i should have  :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

garcho

Re: Etched enclosures
« Reply #2612 on: November 16, 2020, 11:36:01 PM »
Looking great as always D’Astro, bravo
« Last Edit: November 16, 2020, 11:38:36 PM by garcho »
  • SUPPORTER
"...and weird on top!"

lars-musik

Re: Etched enclosures
« Reply #2613 on: March 24, 2021, 11:22:08 AM »
Haha. Look what happens if you are preoccupied and forget an enlcosure in the etching bath. And finally I seems to have mis-measured seriously, so that I even had to 3D print knobs because the drillings were too close together. But I had to finish this, no matter what!


It's a Electric Druid Tap Tremolo into a Ghost Echo by the way.


Marcos - Munky

Re: Etched enclosures
« Reply #2614 on: March 24, 2021, 08:19:09 PM »
Wow! Imo this one is just amazing!

deadastronaut

Re: Etched enclosures
« Reply #2615 on: March 25, 2021, 08:18:17 AM »
love it..looks like sand after water has run off on the beach...wipe out suits it.  8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

ElectricDruid

Re: Etched enclosures
« Reply #2616 on: March 26, 2021, 06:14:04 PM »
love it..looks like sand after water has run off on the beach...wipe out suits it.  8)

Yeah, exactly what I was thinking. It's a beach when the waves go out. Wipe out is perfect. Trem into echo must be a real surf guitar kind of sound too?

Looks fantastic, really unique.

davent

Re: Etched enclosures
« Reply #2617 on: March 26, 2021, 07:08:29 PM »
Happy perfect accident, if you tried to repeat it... good luck!




"If you always do what you always did- you always get what you always got." - Unknown
https://chrome.google.com/webstore/detail/photobucket-hotlink-fix/kegnjbncdcliihbemealioapbifiaedg

Marcos - Munky

Re: Etched enclosures
« Reply #2618 on: March 26, 2021, 08:34:27 PM »
Happy perfect accident, if you tried to repeat it... good luck!
I really doubt it can be done again :icon_lol:

DeusM

Re: Etched enclosures
« Reply #2619 on: April 27, 2021, 10:03:02 PM »
This thread is so addictive. I've seen some beautiful pedals. I think it's my turn to share mine.
Reverse etching is so hard. It stills takes me to many tries to get the ink in the metal. I messed up the edges because I put tape, so the acid doesn't eat too much. I was afraid that it would eat the back of the pedals where the screws go because it already happened the first try (this is my second on). Next time I will do it without covering the edges of the designs.






« Last Edit: April 27, 2021, 10:06:35 PM by DeusM »
It's not the amps that kills you. It's the "mojo"