Author Topic: Morley Classic Wah (Read 10971 times)

askwho69 · « **on:** May 14, 2011, 09:10:18 AM »

Hi all! again asking! after all the googling stuff and unsuccessful search its time to asK!

How does morley wah switch less works? i want to build the classic wah. also is it inductor less? and no wah pot?

thanks

A2

euronymous0001 · « **Reply #1 on:** May 14, 2011, 09:50:29 AM »

try to look for the behringer hellbabe wah, i had one and the pot wqas replaced with an LED/LDR combination

switching was done also with an LED/LDR combo, though i did not try to figure out how it was done.

joegagan · « **Reply #2 on:** May 14, 2011, 11:23:49 AM »

i am pretty sure the morley uses a very sensitive weight sensing switch. i have heard reports from various people of hearing the wah switch on and off while they use them. i think you have to be MAnly when you wah them.

deadastronaut · « **Reply #3 on:** May 15, 2011, 12:44:26 PM »

yep...

i couldnt get on with the switchless wah...annoying as @#$%..i like a definate on/off... not a surprise one..

but yep.. they are indeed ldr...and no fasel/inductor...just an opamp...nice though!...

askwho69 · « **Reply #4 on:** May 15, 2011, 04:23:12 PM »

yah robs its really nice and sounds god too! but the switchless makes me

hehehehe

StereoKills · « **Reply #5 on:** May 15, 2011, 10:08:12 PM »

I'm not sure about the Classic, but the Bad Horsie uses two LED/LDR's, one for the variable resistance and one for switching.

askwho69 · « **Reply #6 on:** May 16, 2011, 06:25:52 AM »

ohh bad horsie is LDR/LED switching? how does it work?please ?

A2

deadastronaut · « **Reply #7 on:** May 16, 2011, 06:31:33 AM »

http://www.morleypedals.com/vai-1es.pdf

might help...

StereoKills · « **Reply #8 on:** May 16, 2011, 08:12:08 AM »

It's pretty neat how they have it physically laid out too. If you're interested, I can grab some gut shots. Not exactly DIY friendly, but that's why I grabbed a used one off of ebay for $30.

deadastronaut · « **Reply #9 on:** May 16, 2011, 08:14:31 AM »

yeah that would be interesting!..nice one!. ive never actually seem the mechanics of it..

StereoKills · « **Reply #10 on:** May 16, 2011, 08:16:07 AM »

Sure, I'll take some pics tonight.

askwho69 · « **Reply #11 on:** May 16, 2011, 12:06:09 PM »

Wow thank you so much mate! a gut shot will be helpful

$30 in ebay? woooooooooooho! thats cheap! Lucky you!

A2

StereoKills · « **Reply #12 on:** May 16, 2011, 12:25:09 PM »

Quote from: joegagan on May 14, 2011, 11:23:49 AM

i am pretty sure the morley uses a very sensitive weight sensing switch. i have heard reports from various people of hearing the wah switch on and off while they use them. i think you have to be MAnly when you wah them.

This may be due to the delay-off feature. When the wah is heel down, the effect will automatically switch off after a time ( the delay is settable by adjusting a trim pot). The default time is ~350ms if I remember.

Paul Marossy · « **Reply #13 on:** May 16, 2011, 01:00:40 PM »

I've never messed with any Morley wahs, because I have always been turned off by their massive size. One of those things would take up half of my pedal board!

StereoKills · « **Reply #14 on:** May 16, 2011, 09:51:56 PM »

Alright, so here are a few pictures of the switching section of my Bad Horsie.
The pedal is spring loaded to return to the heel down position, at this position no light passes through.
Pushing the toe down, it pulls the dividing plate up so light can shine through the slots.
The smaller slot separates the LED/LDR for the wah resistance, the larger slot separates the pair used for switching.

deadastronaut · « **Reply #15 on:** May 17, 2011, 04:14:15 AM »

thanks evan.

wow thats simple then.....morley love a massive board dont they...its the same with the 'classic wah'..(which i have).
i like the no pot setup..very clean sweep...no crackles etc..

your morley looks very clean inside, do you polish it!..

@paul, yeah they are massive, great tiny little circuits to have fun with though...

askwho69 · « **Reply #16 on:** May 17, 2011, 09:32:57 AM »

Wow This is very very very impressive! thank you so much Evan! the switching is the best! 2 Ldr the other on is for switching and the other is for the wah!

Thank!

Rob! i really like the no pot wah too! lets try this

deadastronaut · « **Reply #17 on:** May 17, 2011, 09:52:29 AM »

Quote from: askwho69 on May 17, 2011, 09:32:57 AM

Rob! i really like the no pot wah too! lets try this

already have..

http://www.morleypedals.com/clwes.pdf

StereoKills · « **Reply #18 on:** May 17, 2011, 10:34:32 AM »

Glad I can help. I've always liked the Morley Wahs, quicker to jump into the action with switchless activation, and the LDR IMO is more reliable than a pot.

Now that I have it out, I may have to throw some mods I've had in mind for it in there......

deadastronaut · « **Reply #19 on:** May 17, 2011, 10:40:28 AM »

cool...

ive messed around with the classic wah quite a bit on various projects, i like it better than the colorsound inductorless wah..

much better bypass level too, and general wah freq...nice and simple too!.

what mods were you going for?

News:

Author Topic: Morley Classic Wah (Read 10971 times)