Author Topic: IC Based Overdrive Off-Board Connections  (Read 4832 times)

CBD

IC Based Overdrive Off-Board Connections
« on: December 06, 2011, 10:30:18 AM »
Since I do Not have Strip board, I thought I would try this one.
A few questions though,
What do I connect to Volume Pot #2 ?
What do I connect to Gain Pot #1, #3 ?
Where do I connect the output on the board?

Picture of the Layout below
http://www.aronnelson.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=7179&g2_serialNumber=2

deadastronaut

Re: IC Based Overdrive Off-Board Connections
« Reply #1 on: December 06, 2011, 12:48:08 PM »
 :icon_eek:   tiny pic?....
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

arma61

Re: IC Based Overdrive Off-Board Connections
« Reply #2 on: December 06, 2011, 01:30:32 PM »
a better picture   :D



1 - What do I connect to Volume Pot #2 ? this is yout output - see point #3

2 - What do I connect to Gain Pot #1, #3 ? looks like it contains a small error, gain pot #2 & #1 go to grond (point 4 or 5 or 6), and #3 goes to point 2 on the layout, connected to 4.7k resistor

3 - Where do I connect the output on the board? see #1

enjoy it!!

Ciao

Armando


"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

deadastronaut

Re: IC Based Overdrive Off-Board Connections
« Reply #3 on: December 06, 2011, 01:34:19 PM »
ahhhhh i can see!... :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

CBD

Re: IC Based Overdrive Off-Board Connections
« Reply #4 on: December 06, 2011, 05:32:57 PM »
Thanks all.............. I don't know why I am still having trouble identifying how the signal flow should go.