Double Pedal Wiring............ Would this work?

[endorphin]

I've been wanting to build a double pedal for a very long time and I cannot seem to find any diagrams out there!!!
So after pondering this is what I came up with .

Does everything seem correct to you? Besides effect order this should work right?

Please bare with the wiring I don't use DIYLC too often.

[Pettol]

That looks right to me.

[Processaurus]

The ring and the sleeve connections are mixed up on the input jack. 

If the jacks are the metal kind, that would make the power always be on to the pedal, because as currently drawn the chassis would inadvertently connect the battery/PSU (-) connection to ground.  If it is with plastic jacks, it would work right, but it'd still be kinda.. weird to wire it that way.  Ground goes to the sleeve, battery (-) goes to ring.

The DC jack (-) can actually be separate, and simply connect to ground on the PCB, if you want.  Either way works.

[endorphin]

Ah yes something I would've caught when actually working on the project. Good eye! Thanks for actually looking.

Everything else seem ok though?

I know theres got to be a number of ways to wire a double pedal I'm just going off of what i know the most, which is the Beavisaudio true bypass wiring diagram.