I uploaded pics of 2 pedals that I recently built.  

"FUZZ"  is a fuzzface
"FENDER TUBE" is the fetzervalve




Not sure if this will work!  so,

http://server6.uploadit.org/files/Arnconklin-pedals2.jpg
http://server6.uploadit.org/files/Arnconklin-pedals1.jpg

Peace!
Arn C.

Cool! What are the enclosures usually used for and what method did you use to shield it? I like the small size and the placement of the knob(s).

I also see that you built Runoff Groove's Fetzer Valve. Quick work! I know the circuit is small, but that's a very quick turn-around! It takes me forever to get a pedal finished once I start. :roll:

How does it sound?

Very neat!

I like the minimalistic approach, oh,  and the ps jacks

This reminds me i need to box something, asap

PB Wilson wrote:

QuoteCool! What are the enclosures usually used for and what method did you use to shield it?

Of course you know this will give away my secret enclosures  :lol:
I use plastic chewing tobacco cans-example:Kodiak, Skoal, etc...

For the shielding issue, I always use shielded wire from input and output jacks to switch, unless I don't happen to use a switch, then directly to the board.

PB Wilson also wrote:

QuoteI also see that you built Runoff Groove's Fetzer Valve. Quick work! I know the circuit is small, but that's a very quick turn-around! It takes me forever to get a pedal finished once I start.  How does it sound?

Yes, quick and easy project, not sure how it sounds yet.  I will take it home and check it out.  I am still at work.

Thanks Gringo!  Yes, I always use a power supply, not batteries.  Can get expensive buying batteries all the time.

Thanks for the interest!!!
Peace!
Arn C.

Looks great!

How did you shield the inside, with conductive paint?

Doug

Doug,
      As I wrote above, I use shielded wires.    I buy long runs of cables that you plug say a cassette deck to your power amp, you know the red and white connectors.   I cut the ends off and use that wire.   At the jack ins and outs I hook up the shiled to ground lug and center lead to positive tip of jacks.  The other end only the center lead, I cut off the shileding and use heatshrink so the shielding doesn't touch anything and ground it out.

I tried out the fetzervalve this morning before work and it is really great!
I can get a nice bluesy sound and I can crank it up with humbucker and get the spirit in the sky sound.  Real neat pedal design!!!!
   I recommend this build!

Peace!
Arn C.