any comment on fender-blender?? anyone...

Started by rx5, December 13, 2003, 10:56:37 AM

Previous topic - Next topic

rx5

to anybody who have done this effect, how does it sound??

Ive used BC549C and 1N60 Ge diodes...goin to change it to 1N4148 tommorow....

to me, it sucks..... :? is this because of the diodes??

dunno how you  describe it......
BE d Bezt, Urz D Rezt... RoCk ON!!!

JRobinson

I repaired an original a while back and I agree, it sucked. Your better off to go with a Foxx Tone Machine.

petemoore

...Here we go again.
 One question you can answer as a blank...
 Have you tried a transformer type octave like the Tychobrahe Octavia?
 I built one and the FTM.
 The FTM is quite hard and produces a defined octave heard over more of the neck///"fierce"
 The Tycho has closer to ring mod tones, I use with Fuzz, and guitar vol.
neck or neck/mid pickup [single coils...
 Both work great, I lyke my Tyke...
 The FTM is hardwired for octave, I need to dig in it and find the Fuzz sound and try that.
 There were types' [threads] about RM Octavia being the kick, doesn't look terribly difficult, haven't tried one yet/
Convention creates following, following creates convention.

rx5

Jrobinson,

it really sucks.... havent heard of an FTM though....any links to clips??

gona change the diodes GE to silicon if there could be any differences...

I think the tychobrahe octavia IS better sounding than this....:) have downloaded a clip of it...very nice...

Petemoore,

I would love to make that transformer octavia, problem is Im still searching for a suitable transformer... got one here from an old radio, primary measured(227Ohms-2 terminals), secondary 135 Ohms-3terminals,if from center-tap, 65 Ohms)..I know its much to low in resistance... but Im still gonna give it  a try....:) dont have problems with the tranny, only with the transformer...hehehe

what about the transformer-ess octavia, does it sound like the transformer type?? I think Ive seen it somewhere but I forgot where or what it was.... Or am I just dreaming.... :lol:  :oops:

-Regards

Ralph
BE d Bezt, Urz D Rezt... RoCk ON!!!

Zero the hero

Thank you very much people. I was going to build a Fender blender to hear how does hit sounds and after reading your comments I'll build soemthing else...
I was going to waste much time in tracing a PCB and building it!