Nobles OD-1 (Aion Andromeda) Clarification

[joelo]

I am looking or a confirmation that I understand something correctly.

I'm still a rookie and am about to build the Aion Electronics Andromeda. I want to try it with and with out the 2 extra diodes included in the project. I plan to use sockets for D6 and D7. That way I can try the diodes, and take them out and install a jumpers connecting the left and right pad for each D6 and D7. Am I correct in that's how it works?

Here's a link to the documentation:
https://aionelectronics.com/wp-content/uploads/2018/08/andromeda_documentation.pdf

[Steben]

I guess you mean D5 and D6?

Another simple way is having sockets on the jumper and install a switch.

[joelo]

In this version of the project it says the extra diodes added from the stock version are D6 & D7. Maybe the earlier version was 5 & 6?

As far as a switch, hmmm. I just wanted an easy way to try the stock vs. the project's added 2 diodes. I was assuming I would choose one and then that would be the end of it.

[antonis]

There is no need for permanent switch mount..

By using it, it should more easy to directly compare sound between different diodes..