Author Topic: Pictures! (Read 12437080 times)

peterg · « **Reply #25740 on:** July 12, 2015, 09:17:26 PM »

What the...?

Etienne. That is awesome. How are the circuits wired? In series? Parallel?

Luke51411 · « **Reply #25741 on:** July 12, 2015, 10:24:05 PM »

Cloudscapes, I'd hang that on a wall as a piece of art only... I wouldn't know which side to display.

Here are two of my humble builds, 5f1 jfet OD on a pcb from Jubal81 and the green currant from freppo.

diydave · « **Reply #25742 on:** July 13, 2015, 06:06:14 AM »

A fet emulation of the jcm 800 pre-amp (2204) I've wipped up on a rainy sunday afternoon (the circuit, not the box

).

bluebunny · « **Reply #25743 on:** July 13, 2015, 08:25:23 AM »

Always nice to see a bit of dead tree put to good use.

duck_arse · « **Reply #25744 on:** July 13, 2015, 11:25:55 AM »

Quote from: diydave on July 13, 2015, 06:06:14 AM

A fet emulation of the jcm 800 pre-amp (2204) I've wipped up on a rainy sunday afternoon (the circuit, not the box ).

I was going to say "furniture!", but instead I'll say "glue?"

and that fish!

vigilante397 · « **Reply #25745 on:** July 14, 2015, 03:53:23 PM »

Posted this one in Etched Enclosures, but wanted to post it here as well because of how thrilled I am with it. Dr. Boogie in a 1590B with some lovely old Mongolian script engraved via CNC.

bluebunny · « **Reply #25746 on:** July 14, 2015, 04:36:40 PM »

stallik · « **Reply #25747 on:** July 14, 2015, 05:14:47 PM »

Awesome build Nathan. Any idea what the script says?

Govmnt_Lacky · « **Reply #25748 on:** July 14, 2015, 05:27:18 PM »

Nathan,

Guts or its just a pretty box!

davent · « **Reply #25749 on:** July 14, 2015, 05:47:59 PM »

Nothing wrong with pretty boxes.

vigilante397 · « **Reply #25750 on:** July 14, 2015, 09:48:31 PM »

Quote from: stallik on July 14, 2015, 05:14:47 PM

Awesome build Nathan. Any idea what the script says?

Thanks

It's a few lines from a poem called "The cowardly rabbit"

Quote from: Govmnt_Lacky on July 14, 2015, 05:27:18 PM

Guts or its just a pretty box!

I figured this question would arise, so I would like to assure you that it is MUCH more than just a pretty box, and also inform you that the innards are far from pretty

I apologize for the cell phone picture of the guts, my daughter has hidden my camera from me

idiot savant · « **Reply #25751 on:** July 15, 2015, 05:23:02 AM »

My take on the pt2399 delay. Kinda a mashup of a bunch of ideas from other delays.

Simple control layout, just, mix, time, and feedback.

The little knob is where the fun starts, I'm doing the signal routing with a MCU controlled analog switch, which is currently setup for five 'modes'.

1-normal bypass
2-bypass w/ trails
3-momentary style 'punch-in'
4-momentary 'punch-in' w/ trails
5-this one is kinda like a stutter thing similar-ish to the MWFX judder, or Squarewave Parade Teaspoon. The input is left connected to the delay line, and the output is disconnected in bypass, when you hold the switch down, it swaps, so the input is disconnected, and the output is connected. this is a momentary mode as well, neat with the feedback set high.

shoutout to slacker's echobase, merlin's small time, and rring's vintage delay.

bluebunny · « **Reply #25752 on:** July 15, 2015, 06:13:28 AM »

Quote from: vigilante397 on July 14, 2015, 09:48:31 PM

Quote from: stallik on July 14, 2015, 05:14:47 PM
Awesome build Nathan. Any idea what the script says?

Thanks It's a few lines from a poem called "The cowardly rabbit"

I thought it was the latest Tayda coupon code...

deafbutpicky · « **Reply #25753 on:** July 15, 2015, 10:41:59 AM »

...an echoplex with a tapespeed/endless repeats switch to select the fuction of the second footswitch...

Luke51411 · « **Reply #25754 on:** July 15, 2015, 02:10:08 PM »

That multiplex! Wow!

free electron · « **Reply #25755 on:** July 16, 2015, 06:17:15 AM »

Work still in progress, my new SpinSemi FV-1 dev board:

It's just a DSP/PC comm (USB->UART) module which is plugged into the separate analog front end:

cloudscapes · « **Reply #25756 on:** July 16, 2015, 08:00:08 AM »

Amazing boards! Really clean work! Love the oled too.

keep thinking of making myself loop/buffer boards, too.

free electron · « **Reply #25757 on:** July 16, 2015, 08:24:21 AM »

Thanks Etienne!
FV1 board is designed in KiCad, really recommend trying it out. It still has a few bugs/quirks, but even at this point it's very usable. There is a stable version coming out this month i believe. Open source, multi platform, no restrictions and a nice push & shove router!
These mini OLEDs are really nice for small projects, you need only two pins to drive them (I2C).

cloudscapes · « **Reply #25758 on:** July 16, 2015, 12:01:12 PM »

Thanks, I knew about kicad. Already use diptrace though, and custom libraries.

Are *you* hexe? I'm a fan!

KSG · « **Reply #25759 on:** July 16, 2015, 04:09:39 PM »

Hello, guys!
Here I am with my monsters. The first is my build of 2009 named by me as SoulScreamer. First but not worst. ;-)

Outside:

Inside:

Heavily modded Tube Screamer with very interesting features.

News:

Author Topic: Pictures! (Read 12437080 times)