Author Topic: Dr Boogey ... debugged and great !  (Read 39138 times)

Scruffie

Re: Dr Boogey ... debugged and great !
« Reply #60 on: December 29, 2010, 03:00:16 PM »
And I can't verify it unless someone makes me a PCB and even then, think i'm outta a few parts for now.

i'll make ya one, seeing as you didnt get anything for xmas..as a present ok.. :icon_wink:

itll give you time to get the bits....btw what size trimmers will it need?...
;D Thankk youuu  ;)

Yeah that's true, for the inline trimmers, i'd use the cermet ones at the bottom of this page - http://www.bitsbox.co.uk/resistors/presets.html
or http://www.doctortweek.co.uk/shop/catalog/browse?shop_param=shop_overview_pager%3D2%26cid%3D34%26

For the Tone Knob Trimmer, Me personally i'm gunna stick fixed resistors in its place but you need one of those Square Horizontal type or the type futurlec stock - http://www.futurlec.com/PotTrim.shtml

I could and might alter the layout to allow for other trims though... if there's space.

Edit: Futurlec Stock Both Kinds needed http://www.futurlec.com/PotRect.shtml
« Last Edit: December 29, 2010, 03:03:56 PM by Scruffie »

meffcio

Re: Dr Boogey ... debugged and great !
« Reply #61 on: December 29, 2010, 03:05:24 PM »
i cant make my pcb's till 5th/6thjanuary till my secretary (girlfriend) gets off her backside and goes back to work..where a lazer printer awaits her return... :icon_wink:
Almost same as me. I don't own a (imma firin mah) lazer printer, so my dad prints pcb at work, but now he's on vacation.

deadastronaut

Re: Dr Boogey ... debugged and great !
« Reply #62 on: December 29, 2010, 03:23:54 PM »
yeah id go with the bitbox multiturns i think...

id have a full size pot for the tone too....just for instant tweakability....



@mefficio..yeah id love my own lazer printer....but when someone can do it for you for nothing....great!.. :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #63 on: December 29, 2010, 11:03:49 PM »
hahahah! very funny reasons! :)
"To live is to die"

deadastronaut

Re: Dr Boogey ... debugged and great !
« Reply #64 on: January 04, 2011, 02:49:32 PM »
hi guys, i ripped meffcio's nice pdf...very smooth and detailed graphic and duplicated it on A4...ready to print at 100%

@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..

edit: removed, the pcb was too large......i'll try again. :icon_rolleyes:



« Last Edit: January 04, 2011, 05:33:31 PM by deadastronaut »
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #65 on: January 05, 2011, 05:37:17 AM »
hi guys, i ripped meffcio's nice pdf...very smooth and detailed graphic and duplicated it on A4...ready to print at 100%

@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..

edit: removed, the pcb was too large......i'll try again. :icon_rolleyes:




GO GO GO ROB
"To live is to die"

deadastronaut

Re: Dr Boogey ... debugged and great !
« Reply #66 on: January 05, 2011, 07:18:34 AM »
hi guys, i ripped meffcio's nice pdf...very smooth and detailed graphic and duplicated it on A4...ready to print at 100%

@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..

edit: removed, the pcb was too large......i'll try again. :icon_rolleyes:




GO GO GO ROB


i will i will i will...... :P
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

meffcio

Re: Dr Boogey ... debugged and great !
« Reply #67 on: January 07, 2011, 06:28:23 PM »
@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..
No, I don't, it's even more simple than you think ;)
He made the layout in ExpressPCB, so I 'printed' it to PDF using ExpressPCB + PDFCreator from http://www.pdfforge.org/pdfcreator
The same way works for most of the software, excluding DIY Layout Creator. (shame...)

Scruffie

Re: Dr Boogey ... debugged and great !
« Reply #68 on: January 07, 2011, 06:29:51 PM »
@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..
No, I don't, it's even more simple than you think ;)
He made the layout in ExpressPCB, so I 'printed' it to PDF using ExpressPCB + PDFCreator from http://www.pdfforge.org/pdfcreator
The same way works for most of the software, excluding DIY Layout Creator. (shame...)
Sweet! I'll use this in future, does it just come out correctly sized then?

meffcio

Re: Dr Boogey ... debugged and great !
« Reply #69 on: January 07, 2011, 06:45:46 PM »
Sweet! I'll use this in future, does it just come out correctly sized then?
It should, if you click adobe reader or other software to print without scaling.

deadastronaut

Re: Dr Boogey ... debugged and great !
« Reply #70 on: January 08, 2011, 06:49:35 AM »
ahhh...cool. cheers meffcio!...

https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #71 on: January 08, 2011, 10:39:44 AM »
Rob hows is it :):icon_biggrin: :icon_evil: :icon_idea: :icon_lol: :icon_mrgreen: :icon_question: :icon_surprised: :icon_rolleyes: :icon_twisted:
"To live is to die"

deadastronaut

Re: Dr Boogey ... debugged and great !
« Reply #72 on: January 08, 2011, 12:27:53 PM »
Rob hows is it :):icon_biggrin: :icon_evil: :icon_idea: :icon_lol: :icon_mrgreen: :icon_question: :icon_surprised: :icon_rolleyes: :icon_twisted:

erm....not built yet!.....just made the pcbs..drilled n done...

i'm going to wait till scruffie gets his pcb and verifies/builds it....im sure h'ell give us a build report ...soonish... ;)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #73 on: January 09, 2011, 05:12:23 AM »
ohh thats nice of you rob! nice job~ :icon_evil:
"To live is to die"

Scruffie

Re: Dr Boogey ... debugged and great !
« Reply #74 on: January 09, 2011, 02:11:57 PM »
I anticipate it'll sound like a Dr.Boogey... in a 1590B  :-*

deadastronaut

Re: Dr Boogey ... debugged and great !
« Reply #75 on: January 09, 2011, 02:21:02 PM »
I anticipate it'll sound like a Dr.Boogey... in a 1590B  :-*

oh no!.....arghhhhhhhhhhhhhhhhh.... :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #76 on: January 09, 2011, 11:13:38 PM »
this gonna be kick ass! save $ in enclosure and less in wiring.. i hate wiring pots! hehehe it will be best if it is on board pot :)
"To live is to die"

Scruffie

Re: Dr Boogey ... debugged and great !
« Reply #77 on: January 09, 2011, 11:39:58 PM »
this gonna be kick ass! save $ in enclosure and less in wiring.. i hate wiring pots! hehehe it will be best if it is on board pot :)
That's the plan!  :)

I hate pot wiring too... And mounting floating boards.

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #78 on: January 10, 2011, 11:09:44 PM »
 Yeah :) \m/ horns up
"To live is to die"

askwho69

Re: Dr Boogey ... debugged and great !
« Reply #79 on: January 30, 2011, 08:54:06 AM »
What happend to this  :icon_question: i was waiting foe this :D
"To live is to die"