News:

SMF for DIYStompboxes.com!

Main Menu

Pictures!

Started by Hal, August 23, 2005, 01:58:47 PM

Previous topic - Next topic

chi_boy

Quote from: Pigyboy on July 27, 2010, 11:12:29 AM



Honky Dong Mosfet Booster in Chevelle SS Orange.  There will be a video here soon

elmusicoloco.com

I like the artwork.  Is that a silkscreen?  If not, how is it done?
"Great minds discuss ideas, average minds discuss events, small minds discuss people." — Admiral Hyman G. Rickover - 1900-1986

The Leftover PCB Page

Slade

Quote from: jolly1423 on July 27, 2010, 09:13:56 PM

Nice proyect :D



Make one of these for the 666 competition!

Camphausen

Hey Guys,

here some Pictures of my builds of this year:


ABY Switch


10 Step Random Patterns Generator with Quad Oscillators


FuzzFac


Meathead


Soadameiser modified


SFT


Buff n Boost


Superfuzz


TS808 modified


hopefully not too many pics :D

cheers
Jonathan

~arph

Quote from: Camphausen on July 28, 2010, 06:10:10 AM
hopefully not too many pics :D

Are you kidding me! those are ridiculous! wow. The second time this week that the best first post bar is raised substantially.

Keep them coming!

carrejans

Quote from: jimmybjj on July 26, 2010, 08:42:56 PM
Not nearly as good as most here but I'm proud of it and i wanted to do my part in getting this thread bump up to page 666 ;D The guts are ugly so you don't get to see those yet :icon_redface: My second go at the 2part epoxy finish. The LED is a multi color that flashes at two different paces. No its not a DOD phasor (how dod spells phasor) its a Phase 90. I just liked phasor better than phaser  ;D



Aren't you experiencing any problems with the auto-change multi-color led?
I had one in a pedal once, and it made awfull noises while changing the color.

kupfer_m

Quote from: Camphausen on July 28, 2010, 06:10:10 AM
Hey Guys,

here some Pictures of my builds of this year:



Meathead


SFT


Buff n Boost


Superfuzz


TS808 modified


hopefully not too many pics :D

cheers
Jonathan

Very very nice ! Especially that TS808 looks scary..
What did you use for the graphics?

Greetings,
K

kupfer_m

#13206
I finished this one yesterday :

A fuzzfactory clone in an etched enclosure. The barcode is "fuzz factory"






~arph

Nice!

If only the knobs where a little more to the top of the box.  ;)

kupfer_m

Quote from: ~arph on July 28, 2010, 11:09:11 AM
Nice!

If only the knobs where a little more to the top of the box.  ;)

I know but I used 16mm alpha pots and the pcb is placed as close as possible to the top side of the box.
In this configuration I could not place the pots higher.

jimmybjj

Quote from: carrejans on July 28, 2010, 07:55:53 AM
Aren't you experiencing any problems with the auto-change multi-color led?
I had one in a pedal once, and it made awfull noises while changing the color.


when I tried connecting to the lfo I had crazy noise. connecting like a starndard I didn't get any noise at all.

phector2004

wow great builds!!!!

Found "Hector the Selector" funny... usually I get "Hector the Inspector" coming out of my friends' mouths at parties followed by the girl I'm talking to slowly backing away...  :icon_evil:

can you actually scan the fuzz factory barcode??


Fishface


Pigyboy

Quote from: chi_boy on July 27, 2010, 09:44:27 PM
Quote from: Pigyboy on July 27, 2010, 11:12:29 AM



Honky Dong Mosfet Booster in Chevelle SS Orange.  There will be a video here soon

elmusicoloco.com

I like the artwork.  Is that a silkscreen?  If not, how is it done?

Here
http://www.pulsarprofx.com/DecalPRO/Vertical/1_MENU/1b_Overview/Overview.html
And you'll have to admit, I'll be rich as shit
I'll just sit and grin, the money will roll right in....
                                                            - FANG

studiostud

Quote from: kupfer_m on July 27, 2010, 02:17:44 AM
btw does anyone know where to buy 2part epoxy in Belgium, or a European online store?


I would like in craft stores.  There is a big chain in the US called Michaels which is where I found the stuff I used.  I'm not sure if craft stores are common on Europe, but if not, I would also check art stores.
Builds Completed: Big Muff. Fuzz Face. Tube Screamer. Rat. Crash Sync. Harmonic Jerkulator. 6-band EQ. Rebote 2.5. Tremulus Lune. Small Stone. Small Clone. Microamp. LPB-2. Green Ringer. Red Ranger. Orange Squeezer. SansAmp. MXR Headphone Amp. Bass Fuzz.

Camphausen

@ Kupfer_M

I use Photoshop CS4 for Illustation and selfmade Photoshop based templates.
I try to Finish all my pedals digital first.
So i can see wich Knobs fit the best, or how many space is left for my project in the enclosure.



Brymus

Quote from: Camphausen on July 28, 2010, 06:10:10 AM
Hey Guys,

here some Pictures of my builds of this year:


ABY Switch


10 Step Random Patterns Generator with Quad Oscillators


FuzzFac


Meathead


Soadameiser modified


SFT


Buff n Boost


Superfuzz


TS808 modified


hopefully not too many pics :D

cheers
Jonathan
Geez I hate you !!! JK
Those are so awesome !!! very sweet graphics,especially for a first post.
Stuff like this really discourages me from finishing my ugly builds...Or at least ever posting pics of them if they do ever get finished.

I agree with Slade the bar code FF is VERY impressive !!!
That is a very good etch job,and unique to boot !
I'm no EE or even a tech,just a monkey with a soldering iron that can read,and follow instructions. ;D
My now defunct band http://www.facebook.com/TheZedLeppelinExperience

trad3mark

i have got to learn to etch...

igerup

Nice! The Fail Machine is brilliant.  8) ;D

darron


following on from this thread:
http://www.diystompboxes.com/smfforum/index.php?topic=86035.msg720305#msg720305




the top-right is a tone stack board with shielded wires in/out and 4x true bypass stacks. it has fender, marshall, baxabdall and big muff from left to right. and then all of the components are socketed to that you can easily change values without taking up breadboard space. the bottom is a big earth plate.

and a closer look

Blood, Sweat & Flux. Pedals made with lasers and real wires!