News:

SMF for DIYStompboxes.com!

Main Menu

Pictures!

Started by Hal, August 23, 2005, 01:58:47 PM

Previous topic - Next topic

Renegadrian

Magnus, I believe I have seen some pics of other previous works from you around the net, am I wrong?!
btw, this one looks amazing! And yeah, welcome!  :icon_wink:
Done an' workin'=Too many to mention - Tube addict!

Renegadrian

I didn't make this one, found it browsing around and I thought "I have to post this one!!!"
Zappa inspired FF
Done an' workin'=Too many to mention - Tube addict!

Nikolay

Quote from: flo on September 22, 2009, 08:22:11 PM
@Nikolay: That looper looks great! "Free mode" is a nice extra.
Switching banks would be nicer to do with a big footswitch instead of that small black "A-B" knop. Now the user has to bend down and press the "A-B" knop to switch banks.

So how does the user program a preset?

Thanks Flo!

Actually I think, that the small buttons are good at this time

To make program just hold Learn/Store for 2 second. First choose loops. press Learn/Store again, and choose preset.



BTW, today I make this custom footswitch for Peavey ValveKing:

Magnus

#10563
Hello,
QuoteMagnus, I believe I have seen some pics of other previous works from you around the net, am I wrong?!
btw, this one looks amazing! And yeah, welcome!
Quite possible, i have build some more pedals  ;)

Here is the next one, a DOD OVERDRIVE PREAMP 250-Clone,
build to the "old grey specifications", the pcb is cloned by me from an original
and you can choose between the standard- (10nF) and the "malmsteen"-input-cap (1nF)

Here it is:



The pcb:



A pcb-comparison (original: left / cloned: right)



And a gutshot:




Greetings from germany
Magnus
AMZ Booster, Dist. +, DOD 250,
Dr. Boogey, Fuzz Face's, JCM800-Emu, LPB1,
May Booster, Obsidian, Orange T/B-Booster,
Pentaboost, Prof. Tweed, Rangemaster's,
SansAmp GT2, Superfly (Amp), Guv'nor,
Tone Bender MKI/MKII/MKIII, TS 808

kristoffereide

that's some slick OBW Magnus!
Quote from: biggy boy on April 12, 2009, 06:22:33 PM
I find it funny how I can have close to 1000 components, yet I never seem to have enough parts to make a project. :icon_eek:

Magnus

Hello,
Quoteslick OBW

Ähmm, what does this mean?!


Greetings
Magnus
AMZ Booster, Dist. +, DOD 250,
Dr. Boogey, Fuzz Face's, JCM800-Emu, LPB1,
May Booster, Obsidian, Orange T/B-Booster,
Pentaboost, Prof. Tweed, Rangemaster's,
SansAmp GT2, Superfly (Amp), Guv'nor,
Tone Bender MKI/MKII/MKIII, TS 808

The French connection

My guess:

OBW = Off Board Wiring!
I know, but the pedal i built does not boost...it just increases volume!
My picture files:
http://www.aronnelson.com/gallery/main.php/v/French+connection/
http://s193.photobucket.com/albums/z4/letournd/Pedal/

roseblood11

Quote from: The French connection on September 23, 2009, 01:38:09 PM
My guess:

OBW = Off Board Wiring!

Genau, es heißt dein Pedal hat die Haare schön  :D :D Ich glaube, auf das Bild hab ich in einem Newbie-Thread schon mal verlinkt, als "gutes Beispiel"...

---

What type of diodes is that in the original DOD pedal? Old blue-line japanese 1S???, or Schottkys?

Fuzz Aldryn

Quote from: roseblood11 on September 23, 2009, 01:48:55 PM
Quote from: The French connection on September 23, 2009, 01:38:09 PM
My guess:

OBW = Off Board Wiring!

Genau, es heißt dein Pedal hat die Haare schön  :D :D Ich glaube, auf das Bild hab ich in einem Newbie-Thread schon mal verlinkt, als "gutes Beispiel"...

---

What type of diodes is that in the original DOD pedal? Old blue-line japanese 1S???, or Schottkys?

hehe^^! Ich finde es nur unglaublich: Wie lange ist er schon dabei und entdeckt diesen Thread oder dieses Board erst jetzt? oO
Naja, hat er aber wirklich schön gemacht.
Btw.: My guess: 1S***

Cheers
Helge

fuzzo

If everyone starts to speak with native language that will be really hard to communicate ! Nom d'un petit bonhomme en mousse !

Barcode80

Great looking OD250, but I can't figure out why people put jacks at the bottom of the pedal?!?!?

The French connection

Quote from: Barcode80 on September 23, 2009, 03:45:10 PM
Great looking OD250, but I can't figure out why people put jacks at the bottom of the pedal?!?!?

Shorter wire to the switch i supposed. What i don't figure out is those who put the DC jack on the side...how do you plug it when you use a daisy chain?

Quote from: fuzzo on September 23, 2009, 03:40:49 PM

If everyone starts to speak with native language that will be really hard to communicate ! Nom d'un petit bonhomme en mousse !

T'as ben raison mon ami et c't'encore pire si on utilise des régionalismes St-Crème de bout d'ciarge! Try to Babelfish that...

Dan
I know, but the pedal i built does not boost...it just increases volume!
My picture files:
http://www.aronnelson.com/gallery/main.php/v/French+connection/
http://s193.photobucket.com/albums/z4/letournd/Pedal/

kristoffereide

I wanted to tell you: zhat iz very nize wörk zhere Magnüz (I don't speak German) wizh zhe kabel
Quote from: biggy boy on April 12, 2009, 06:22:33 PM
I find it funny how I can have close to 1000 components, yet I never seem to have enough parts to make a project. :icon_eek:

Valoosj

Quote from: fuzzo on September 23, 2009, 03:40:49 PM
If everyone starts to speak with native language that will be really hard to communicate ! Nom d'un petit bonhomme en mousse !

El monolinguismo es un enfermedad ...
;D
Quote from: frequencycentral
You squeezed it into a 1590A - you insane fool!  :icon_mrgreen:
Quote from: Scruffie
Well this... this is just silly... this can't fit in a 1590B... can it? And you're not even using SMD you mad man!

earthtonesaudio

Quote from: Valoosj on September 23, 2009, 05:40:54 PM
Quote from: fuzzo on September 23, 2009, 03:40:49 PM
If everyone starts to speak with native language that will be really hard to communicate ! Nom d'un petit bonhomme en mousse !

El monolinguismo es un enfermedad ...
;D

The single language is hospitalized?   ???

SpencerPedals

Quote from: Barcode80 on September 23, 2009, 03:45:10 PM
Great looking OD250, but I can't figure out why people put jacks at the bottom of the pedal?!?!?

It looks odd but if you don't use a battery, it actually uses up space at the bottom that's often "wasted" and gives you more room up by the pots for PCB mounting room, etc.  I've done it on a pedal or two and may just make it common practice for anything going on my pedalboard.

Renegadrian

Ma che state a di'?! Ma se po' sape'?! 'cci vostri...Ve vojo bene a tutti... :D

(actually this is written in roman slang, which obviously differs from pure italian...)
Done an' workin'=Too many to mention - Tube addict!

John Lyons

Less talk, more pics  ;D




Basic Audio Pedals
www.basicaudio.net/

The French connection

Haaaa finally! A picture is worth a thousand words...and in every language. Nice clean build Mr. Lyons.
I know, but the pedal i built does not boost...it just increases volume!
My picture files:
http://www.aronnelson.com/gallery/main.php/v/French+connection/
http://s193.photobucket.com/albums/z4/letournd/Pedal/

obblitt

A little tidbit for the multilingual here:

There are more multilingual speakers in the worlds population than monolingual.